Ifindoubtpleasecontactlocalservice Agency

B.1 INSTALLATION

WEAR PROTECTIVE GLOVES WHEN

UNPACKING AND INSTALLING THE

APPLIANCE.

Read these instructions carefully before

attempting installation. Installation and initial startup should be performed by a qualified installer. Unless the installation instructions for this product are followed by a qualified service technician (a person experienced in and knowledgable with the installation of commercial equipment) then the terms and conditions on the Manufacturer's Warranty will be rendered void and no warranty of any kind shall apply.

IFINDOUBTPLEASECONTACTLOCALSERVICE AGENCY.

CAUTION:

the operations described below should be carried out in com- pliance with current safety regulations, with reference both to the equipment used and the operating procedures.

IMPORTANT: before moving the appliance, make sure that the load-bearing capacity of the lifting equipment to be used is suitable for the weight of the appliance.

B.1.1REMOVINGTHEPACKAGING

B.1.1.1 Removing the packaging and handling

Cut the straps and remove the protective film, taking care not to scratch the sheet metal if scissors or blades are used. Remove the top (in cardboard), the polystyrene corners and the vertical protection pieces. For appliances with stainless-steel cabinets, carefully remove the protective film without tearing it, to avoid leaving glue stuck to the surface.

Should this happen, remove the traces of glue with a non- corrosive solvent, rinsing it off and drying carefully. It is advisable to go over all the s/steel surfaces with a rag soaked in vaseline oil, in order to form a protective film. Use a transpallet or fork- lift truck to lift appliances. Inserting the forks under the pallet, lift the appliance and carry it to the place of installation, making sure that the load is balanced.

WARNING:

during handling do not push or pull the unit: it may tip over or be damaged.

B.1.1.2 Disposing of the packaging

Packing materials should be disposed of accordance with the binding laws in the country where the appliance is to be used. Recyclable plastic parts are marked as follows:

polythene: outer wrapping, instructions booklet bag

polypropylene: straps

polystyrene foam: corner pads

pressed board: protective surround elements

B.2.1POSITIONING

Install the equipment, taking all the safety precautions required for this type of operation, also respecting the relevant fire-prevention instructions. Place the appliance in a ventilated room and away from heat sources such as radiators or air- conditioning systems, in order to allow the cooling of the refrigerating unit components. Never cover the condenser, not even temporarily, as this may jeopardise the operation of both the condenser and the appliance.

Make sure to position the appliance taking into consideration the space needed for door opening.

Pay particular attention to levelling of the floor on which the appliance stands, in order to ensure its optimal operation.

IMPORTANT:

level the appliance, otherwise its operation could be compromised.

Use the height-adjustable feet to make sure the appliance is level, and at the same time check that the door closes properly.

+30 mm

-10 mm

For trouble-free operation of the appliance, it is recommended that a gap of at least 9.84”/ 250mm be left between the appli- ance and the ceiling.

Should the appliance be installed in rooms where there are corrosive substances (chlorine, etc.), it is advisable to go over all the stainless steel surfaces with a cloth coated with vaseline oil, in order to form a protective film.

The maximum ambient temperature at which the appliances may operate is +109.4°F/+43°C.

Note: the power plug should be accessible even after having placed the appliance in its final position for installation. IMPORTANT: on the back of the appliance there are two cables, indicated with the letter “K”. These cables are used for fixing the appliance to the wall, if required.

5957 410 01, PR43RE1FEU, 726673 specifications

The Electrolux 5957 410 01, 726673, PR43RE1FEU is a premium household appliance designed to enhance the efficiency of your kitchen while providing exceptional performance. With its sleek design and advanced features, this model seamlessly blends functionality with modern aesthetics.

One of the key features of the Electrolux 5957 410 01 is its state-of-the-art cooking technology. This appliance comes equipped with innovative induction cooking systems that provide precise temperature control and rapid heating. Induction cooking not only ensures faster cooking times but also enhances energy efficiency, as it directly heats the cookware instead of the cooktop itself. This means less wasted energy and a cooler kitchen environment.

The appliance is designed with user convenience in mind. It features an intuitive touch control panel that makes it easy to select and adjust cooking settings. The controls are not only straightforward but also responsive, allowing users to make changes instantly while cooking. Additionally, the model incorporates a timer function which enables multitasking without the worry of overcooking.

Safety is a priority in the design of the Electrolux 5957 410 01. It comes with advanced safety features such as child locks and automatic shut-off functionality. This ensures peace of mind for families, knowing that the appliance will not pose a risk when not attended. The cooktop's residual heat indicators also serve as a reminder that the surface may still be hot after use, preventing accidental burns.

Another noteworthy characteristic of this appliance is its flexible cooking zones. The cooktop has multiple zones that can be combined to accommodate larger cookware, making it ideal for preparing meals in large quantities. Whether you are simmering a sauce in a small pot or grilling on a large skillet, the Electrolux 5957 adapts to your needs.

Furthermore, the design incorporates cleaning-friendly materials that resist stains and scratches, making maintenance a breeze. The smooth surface allows for easy wiping, ensuring that the appliance remains in pristine condition over time.

In summary, the Electrolux 5957 410 01, 726673, PR43RE1FEU stands out for its advanced induction cooking technology, user-friendly controls, comprehensive safety features, versatile cooking zones, and easy maintenance. This model exemplifies Electrolux's commitment to quality and innovation in the modern kitchen. With this appliance, users can enjoy an enhanced cooking experience that is both efficient and enjoyable.