Appliance Description
Prior to Initial Start-Up
1 Before connecting the appliance to the mains and putting it into ope- ration for the first time, leave the appliance to stand for 30 minutes if it was transported upright. After transport on its side, the appliance must be left to stand for 2 hours before putting it into operation. This is necessary to allow the oil to flow back into the compressor. Otherwise the compressor may be damaged.
01. Please clean the appliance interior and all accessories prior to initial
Initial Start-Up
Refrigerator and freezer compartments can be operated and controlled independently of one another.
01. Insert plug into mains socket.
Refrigerator Start-Up
01. Press refrigerator ON/OFF button.
The green power indicator for the fridge compartment lights up. The refrigerator temperature display shows the current, actual refrigerator temperature. A warning tone sounds and the flashing red warning light indicates that the required storage temperature has not yet been reached.
2.Press the WARNING OFF button to switch off the warning tone.
3.Set the refrigerator to the desired temperature (see section: "Tempera- ture Adjustment").
3 Goods to be refrigerated can be loaded immediately after switching on, because the storage temperature in the refrigerator is quickly reached.
Freezer Compartment Start-Up
01. Press freezer compartment ON/OFF button.
The green power indicator for the freezer compartment lights up. The freezer compartment temperature display shows the current, actual freezer compartment temperature. A warning tone sounds and the flashing red warning light indicates that the required storage tempera- ture has not yet been reached.
2.Press the WARNING OFF button to switch off the warning tone.
3.Set temperature to
3 Do not load freezer with goods until a temperature of
20 | 818 20 |