14Maintenance
Maintaining Your Wine Cooler/ Beverage Center
Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life. The maintenance intervals listed are based on normal conditions. You may want to shorten the intervals if you have pets or other special considerations.
Exterior Cleaning for Your Stainless Steel Model
•Your stainless steel model may discolor when exposed to chlorine gas, pool chemicals, salt water, or cleaners with bleach.
•Keep your stainless unit looking new by cleaning with a high quality,
•DO NOT CLEAN WITH STEEL WOOL PADS.
•DO NOT USE CLEANERS THAT ARE
NOT SPECIFICALLY INTENDED FOR STAINLESS STEEL (this includes glass, tile and counter cleansers).
•If any surface discolors or rusting appears, clean it quickly with
Always clean in the direction of the grain. Always finish this process with a high quality,
•USE OF ABRASIVE PADS SUCH AS
SCOTCHBRITE WILL CAUSE THE GRAINING IN THE STAINLESS TO BECOME BLURRED.
•Rust that is allowed to linger can penetrate into the surface of the stainless steel and become impossible to remove.
CAUTION
•Stainless steel models exposed to chlorine gas and moisture such as areas with spas or swimming pools, may have some discoloration of the stainless steel. Discoloration from chlorine gas is normal.
Follow exterior cleaning instructions.
•NEVER USE CHLORIDE OR CLEANERS
CONTAINING BLEACH TO CLEAN STAINLESS STEEL.
Interior Cleaning - as Required
1Disconnect power to the wine cooler / beverage center.
2Remove racks if desired, see “WINE RACK
REMOVAL/INSTALLATION” below.
3Wipe down the interior with a solution of non- abrasive mild detergent and warm water.
4Rinse with clear water.
5Reconnect power to the unit.
Wine Rack Removal/Installation
1Open door fully.
2Extend wine rack fully.
3Ball bearing slide features plastic release latches on each side. Push release latches, then pull wine rack out.
4To reinstall, push ball bearing slides in fully. Slide rack into ball bearing slide ensuring each side engages properly.