21 m

3.Open the door and push the appliance against the side of the kitchen unit opposite to that of ap- pliance hinges. Fasten the appliance with 4 screws (I) provided in the kit included with the appliance.

4.Snap vent grille (B) and hinge cover (E) into position.

Apply covers (C-D) on joint cover lugs and into hinge holes.

HaHb

PR266

5.Separate parts Ha, Hb, Hc, Hd as shown in the figure.

ca. 50 mm
	90°
	21 m
	m
	90°
ca. 50 mm	21 m
	21 m
	m

6.Place guide on the inside part of the furniture door, up and down as shown in the figure and mark the position of external holes. After having drilled holes, fix the guide with the screws supplied.

7.Fix cover (Hc) on guide (Ha) until it clips into place.

8mm

PR167

8.Open the appliance door and the furniture door at 90¡. Insert the small square (Hb) into guide (Ha). Put together the appliance door and the furniture door and mark the holes as indicated in the figure.

Electrolux ERN 16300, ERN 23500 manual 21 m