Instructions for the Installer

Technical data


Model	ZRD 1845

Gross capacity (l)	Freezer:	42
	Refrigerator: 138

Net capacity (l)	Freezer:	42
	Refrigerator: 136

Width (mm)	496

Height (mm)	1209

Depth (mm)	600

Energy consumption (kWh/24h)	0,721
(kWh/year)	263

Energy class, according to EU standards	A

Freezing capacity (kg/24h)	3

Rising time (h)	17

Rated power (W)	75

Weight (kg)	39

Number of compressors	1

Installing the appliance

Transportation, unpacking

The appliance and the interior fittings are protected for transport.

Remove all packaging and any adhesive tape.

Any remnants of adhesive can be removed using white spirit.

After transportation the appliance must not be switched on for 2 hours. This is to allow the refrigerant to settle.

Cleaning

Clean the accessories and the inside of the appliance with warm water and bicarbonate of soda (5 ml to 0.5 litres of water). Rinse and dry thoroughly.

Do not use detergents, abrasive powders, highly perfumed cleaning products, wax polishes or cleaning products containing bleach or alcohol.

Location

The appliance should be positioned in a well ventilated, dry room.

Energy use is affected by the ambient temperature.

The appliance should therefore:

not be installed next to radiators, cookers or other sources of heat

only be installed at a location where the ambient temperature corresponds to the climate classification, for which the appliance is designed.

The climate classification can be found on the rating plate.

The following table shows which ambient temperature is correct for each climate classification:

Climate Classification	Ambient Temperature

SN	+10 to +32 °C

N	+16 to +32 °C

ST	+18 to +38 °C