Electrolux ERU 6374 instruction manual 596

Page 16

2.Push the appliance into place. The plug socket necessary for connection of the appliance to the electricity supply should be positioned, so that the plug is not placed in the recess.

3.To adjust the height proceed as follows:

-Loosen or tighten the two front feet.

-The rear feet are adjusted by turning the screw in the front kick plate to the left or right.

596

555

max

-

+

2Li89

4.If necessary, pads are supplied for the rear feet to make sliding the appliance in and out of the recess easier. To fit the pads, press them onto the rear feet.

If required, the dimensions of these pads can be reduced by breaking them where marked.

II52

N.B. The joint cover (B) is to be assembled after having installed the appliance in the recess.

2

1

B

 

3

 

 

115°

4

 

5.Screw appliance into place and retain the cabinet with screws through the securing brackets into the worktop or adjacent woodwork as necessary.

5

16

Image 16
Contents F r i g e r a t o r Important Safety Instructions Contents Setting the temperature Description of the ApplianceOperation Before useDoor shelves -star compartmentFreezing fresh food Frozen food storageMaking ice cubes Health and Safety GuidelinesNormal Operating Sounds Defrosting Maintenance and Cleaning Internal cleaningPeriodic cleaning Changing the light bulbSymptom Solution Something not Working?Customer Care Department Service and Spare Parts08705 Guarantee Conditions Standard guarantee conditionsEuropean Guarantee This guarantee does not coverInstallation Technical specificationsPositioning Door reversal Electrical Connection Inner door reversalGrid preparation Building-inBuilding in the appliance under a worktop 596 Clic Fitting the plinth Page Electrolux plc