Downdraught Extractor
1.To turn the downdraught extractor on, press k.
2.To select the height position, press
m.
The downdraught extractor will move to middle position and switch on at extraction rate 1.
To turn the downdraught extractor off, hold ldown until bottom position has been reached.
Pressing kwill turn extraction off, but the downdraught extractor will remain where it is and not descend into the worktop.
Height positions
Installation beside electrical appli- ances
The downdraught extractor is variable between the middle and top position.
Raising
The downdraught extractor is switched on.
Select the height position within 10 seconds.
1.Press m.
The downdraught extractor will move to middle position. The dampers are deployed.
2.Press magain.
10