Installation beside a gas appliance
If the downdraught extractor is installed beside a gas appliance, it must only be operated in top posi- tion and extract from the other side, i.e. the damper closest to the gas appliance must be closed permanent- ly.
This can be done as follows:
1.Modifying the electronic control system
On the PCB cut the jumper labelled "JP01". The downdraught extractor can now only be operated in top position.
2.Removing a damper
To be able to mount the cover plate, the damper has to be removed as fol- lows:
1.Switch the downdraught extractor on and raise it to top position.
2.Lift the top cabinet off.
3.Turn the top cabinet upside down and put it on a soft base. Take care not to scratch the glass on the top.
4.Remove the two screws holding the damper and the single screw holding the activation arm that closes the damper.
The damper can now be removed.
24