Electrolux EFG 535, EFG 540 Description of the appliance, Control Panel, Extractor version

Description of the appliance

••The cooker hood is supplied ready for use as a recirculation hood and may be used for extraction by removing the charcoal filter which have been fitted inside the cooker hood.

Extractor version

•In this version fumes are extracted to the outside via a hose connected to the coupling ring. Fig. 1.

•In order to obtain the best performance the hose should have a diameter equal to the outlet hole.

Hose*

Cabinet

Coupling ring

Fig. 1 * The hose is not supplied and must be purchased separately.

Recirculation Version

•The air is filtered through charcoal filters and returned to the kitchen. Fig. 2.

•You will need original ELECTROLUX charcoal filters for the recirculation function. (Available from your local Service Force Centre)

Hose*

Cabinet

Charcoal filters

Fig. 2 * The hose is not supplied and must be purchased separately.

Control Panel	4
• Best results are obtained by using a low speed		Light switch
for normal conditions and a high speed when			Motor switch
odours are more concentrated.
Turn the hood on a few minutes before you start
cooking, you will then get an under pressure in
the kitchen. The hood should be left on after
cooking for about 15 minutes or until all the
odours have disappeared. The control switches
are located on the hood’s front panel:
Correct ventilation
If the cooker hood is to work correctly there must
be an under pressure in the kitchen. It is important		Fig. 3
to keep the kitchen windows closed and have a
window in an adjacent room open.