Electrolux EFI 625 Installation Instructions, Electrical Connections, Electrical Requirements

Page 10

INSTALLATION INSTRUCTIONS

It is dangerous to alter the specifications or attempt to modify this product in any way.

Technical Information

 

 

 

DIMENSIONS

HEIGHT:

 

350mm

 

WIDTH:

 

598mm

 

DEPTH:

270-360mm

 

DEPTH WITH VISOR OPEN:

540-630mm

WEIGHT

GROSS:

EFI 625 12,5 kg - EFI 630 14 kg

 

NET:

EFI 625 10,9 kg - EFI 630 12,5 kg

ELECTRICAL SUPPLY:

Voltage (~50Hz)

 

220-240 V

POWER CONSUMPTION:

 

EFI 625 190 W - EFI 630 225 W

FAN MOTOR:

 

EFI 625 145 W - EFI 630 110 W

LAMP:

2 x 40 W

 

80 W

SUITABLE FOR INSTALLATION

 

 

 

ABOVE:

ELECTRIC HOB:

7

KW (max)

 

GAS HOB:

10

KW (max)

 

SLOT-IN GAS COOKER

13.5

KW (max)

 

SLOT-IN ELECTRIC COOKER

12.4

KW (max)

CHARCOAL FILTER/S:

Supplied

 

 

Note: CE Marking certifies that this appliance complies with the requirements laid down in EEC directive 89:336. (Electromagnetic compatibility) and subsequent modifications and Low Voltage directive 72/23/E.

ELECTRICAL CONNECTIONS

WARNING: DOUBLE INSULATED DO NOT EARTH

Electrical Requirements

Any permanent electrical installation must comply with the latest I.E.E. Regulations and local Electricity Board regulations. For your own safety this should be undertaken by a qualified electrician e.g. your local Electricity Board, or a contractor who is on the roll of the National Inspection Council for Electrical Installation Contracting (NICEIC).

This appliance is fitted with a 2 core mains cable and must be permanently connected to the electricity supply via a double-pole switch having 3mm minimum contact gap on each pole. A Switched Fuse Connection Unit to BS1363 Part 4, fitted with a 3 Amp fuse, is a recommended mains supply connection accessory to ensure compliance with the Safety Requirements applicable to fixed wiring instructions.

Electrical Connection

Before connecting to the mains supply ensure that the mains voltage corresponds to the voltage on the rating plate inside the cooker hood.

This appliance conforms to BS 800: 1988 and EEC Directive No. 78 308 regarding suppression of radio and television interference.

1 0

Image 10
Contents Instruction Book Installing the Cooker Hood Maintenance and CleaningElectrical Connections Child Safety Important Safety InformationInstallation Maintenance and ServiceYour Appliance Operating Instructions Cooker Hood ControlsRecirculation Extraction Mode Recirculation ModeTo Operate ExtractionMaintenance and Cleaning Changing the Lamps Symptom Solution Service and Spare PartsSomething not Working Guarantee Conditions Standard Guarantee ConditionsElectrical Requirements Installation InstructionsElectrical Connections Electrical ConnectionDucting Installing the Cooker HoodInstallation Requirements Clearance HeightFixing kit comprises UnpackingFitting the Wall Brackets Venting To Fit the DuctingDecor Panel Fitting the Cooker Hood to the WallFitting a Decor Panel to the Hood Visor Adjustment To Refit the Hood with Decor Panel AttachedPage Page Page Page Berkshire SL1 1DZ