Electrolux EFC 9440 user manual Wall unit mounting Fig, Drill two holes Ø 8mm on the upper side

Page 12

Installation

Wall unit mounting - Fig. 7

Disconnect the hood during electrical connection, by turning the home mains switch off. Remove the 2 screws fitted inside the lower part of the hood at the points in which it is fixed to the motor unit (see also operation 3).

•Rest the motor unit on a flat

surface and thread the lower part

G

of the chimney section onto it (1).

• Make all the electrical

20a

connections between the two

F

parts (2).

 

• Secure the two parts using 8

H

screws (3).

 

• Mark the wall with a centre line, this

 

20a

14

will aid the fixing procedure (4), position

 

 

the template so that the mid line printed on

 

 

the template matches with the centre line

 

 

previously marked, the lower side of the

 

 

template corresponds to the lower side of

 

 

the hood once installed (5).

 

 

• Drill two holes Ø 8mm and fix the support

 

 

bracket with two wall plugs and screws

 

 

(6).

19

18

• Hang the hood (7) adjust its position (8-9)

 

 

 

and from the inside of the hood mark one

 

 

point for final fixing (10), remove the hood

8

D

(11) and drill an hole Ø 8mm (12), fit a

2

 

wall plugs (13).

 

 

 

20b

G 15 20b

7-16

114

11

6

9

5

 

• Drill two holes Ø 8mm on the upper side

8 9

8

12

close to the ceilling (14), fit two wall

 

plugs and fix the chimney support

 

with two screws (15).

 

• Hang the hood again (16).

17

• Fix it securely with a screw

1

(17). To simplify the

1

installation operation

 

remove the charcoal filter

 

frame.

 

• If the hood is used in the

 

recirculation function, fix

Fig. 7

the deflector F on the

 

chimney support G with 2

 

screws and fit an extraction

 

pipe (18 - not supplied) to connect deflector to the outlet hole D of the hood.

In case the hood is to be used in exhausting version, then the deflector must not be

mounted and fit an extraction pipe (18) to connect outlet￿￿hole D of the hood to the outside.

• Make the electrical connection (19), but leave the hood disconnected from the household mains supply.

• Fix the chimney (20a) to the chimney support (20b).

Slide down the lower section on the proper housing on top of the hood. Connect the hood to the household mains supply and check that the hood works correctly.

13 10

3

Page 11 Page 13
Image 12
Page 11 Page 13
Contents EFC Contents Safety warnings For the installerFor the user Description of the Appliance Control PanelExtraction RecirculationMaintenance and care Cleaning the hoodMetal grease filter Removing the metal grease filterCharcoal filter Changing the light bulb FigSpecial accessories What to do ifTechnical assistance service not for UK Service and spare parts for UKInstallation UnpackingLocation Electrical connection not for UKMounting accessories included Wall unit mounting Fig Drill two holes Ø 8mm on the upper sideElectrolux

EFC 9440 specifications

The Electrolux EFC 9440 is a kitchen appliance that embodies modern design and advanced technology in a range hood. Known for its efficiency and elegant appearance, the EFC 9440 is an excellent addition to any contemporary kitchen.

One of the standout features of the Electrolux EFC 9440 is its powerful extraction capability. Equipped with a robust motor, it delivers strong suction power that effectively eliminates smoke, odors, and grease from the air, ensuring a fresher cooking environment. The range hood also operates quietly, allowing for a pleasant cooking experience without disruptive noise.

The EFC 9440 offers multiple speed settings, allowing users to adjust the extraction power according to their cooking needs. Whether you are simmering a delicate sauce or frying up a storm, you can easily control the ventilation to suit any cooking scenario. The intuitive control panel features easy-to-use buttons, enhancing user convenience and accessibility.

In terms of design, the Electrolux EFC 9440 boasts a sleek stainless-steel construction that not only adds a touch of elegance but also ensures durability and resistance to wear and tear. Its minimalist style blends seamlessly with various kitchen decors, making it a versatile choice for homeowners.

Another notable technology incorporated in the EFC 9440 is the built-in lighting system. The range hood is equipped with energy-efficient LED lights that illuminate the cooking area effectively, allowing for precise cooking and monitoring of food preparation. This feature is particularly useful for evening cooking, ensuring that you can see everything clearly without straining your eyes.

The EFC 9440 also emphasizes easy maintenance. The grease filters are dishwasher-safe, making it simple to clean and maintain the optimal performance of the range hood. Regular cleaning of these filters helps to maintain indoor air quality and prolong the life of the appliance.

In terms of dimensions, the Electrolux EFC 9440 is designed to fit various kitchen layouts, providing flexibility in installation. It can be mounted under cabinets or as a wall-mounted unit, catering to the specific needs of your kitchen design.

Overall, the Electrolux EFC 9440 combines style, functionality, and advanced technology, making it an ideal choice for anyone looking to enhance their kitchen environment. With its powerful extraction capabilities, customizable settings, and user-friendly design, the EFC 9440 stands out as a reliable and aesthetically pleasing kitchen appliance.
Top Page Image Contents