Electrolux EFC 9440 user manual Safety warnings, For the installer

Page 3

Safety warnings

For the installer

When used as an extractor unit, the hood must be fitted with a 150mm diameter hose.

Should there already be a pipe with a diameter of 125mm that ducts to the outside through the wall or roof, it is possible to use the 150/125 mm reduction flange provided. In this case the hood will be slightly noisier.

When installing the hood, make sure you respect the following minimum distance from the top edge of the cooking hob/ring surfaces:

electric cookers

500

mm

gas cookers

700

mm

The hood can be installed above these heights but for optimum performance it should be installed at the distance quoted for the appropriate heat source.

The national Standard on fuel-burning systems specifies a maximum depression of 0.04 mbar in such rooms.

The air outlet must not be connected to chimney flues or combustion gas ducts. The air outlet must under no circumstances be connected to ventilation ducts for rooms in which fuel-burning appliances are installed.

The air outlet installation must comply with the regulations laid down by the relevant authorities.

When the unit is used in its extractor version, a sufficiently large ventilation hole must be provided, with dimensions that are approxi- mately the same as the outlet hole.

National and regional building regulations impose a number of restrictions on using hoods and fuel-burning appliances connected to a

chimney, such as coal or oil room-heaters and

 

gas fires, in the same room.

￿￿

• Hoods can only be used safely with appliances

 

connected to a chimney if the room and/or flat

 

(air/environment combination) is ventilated from

 

outside using a suitable ventilation hole approxi-

 

mately 500-600 cm2 large to avoid the

 

possibility of a depression being created during

 

operation of the hood.

 

• If you have any doubts, contact the relevant

 

controlling authority or building inspector’s

 

office.

 

• Since the rule for rooms with fuel burning

 

appliances is “outlet hole of the same size as the

 

ventilation hole”, a hole of 500-600 cm2, which

 

is to say a larger hole, could reduce the perfor-

 

mance of the extractor hood.

 

• If the hood is used in its filtering function, it will

 

operate simply and safely in the above

 

conditions without the need for any of the

 

aforementioned measures.

When the hood is used in its extractor function, the following rules must be followed to obtain optimal operation:

short and straight outlet hose

keep bends in outlet hose to a minimum

never install the hoses with an acute angle, they must always follow a gentle curve.

keep the hose as large as possible (preferably the same diameter as the outlet hole).

Failure to observe these basic instructions will drastically reduce the performance and increase the noise levels of the extractor hood.

Image 3
Contents EFC Contents For the installer Safety warningsFor the user Recirculation Description of the ApplianceControl Panel ExtractionRemoving the metal grease filter Maintenance and careCleaning the hood Metal grease filterChanging the light bulb Fig Charcoal filterWhat to do if Special accessoriesService and spare parts for UK Technical assistance service not for UKElectrical connection not for UK InstallationUnpacking LocationMounting accessories included Drill two holes Ø 8mm on the upper side Wall unit mounting FigElectrolux

EFC 9440 specifications

The Electrolux EFC 9440 is a kitchen appliance that embodies modern design and advanced technology in a range hood. Known for its efficiency and elegant appearance, the EFC 9440 is an excellent addition to any contemporary kitchen.

One of the standout features of the Electrolux EFC 9440 is its powerful extraction capability. Equipped with a robust motor, it delivers strong suction power that effectively eliminates smoke, odors, and grease from the air, ensuring a fresher cooking environment. The range hood also operates quietly, allowing for a pleasant cooking experience without disruptive noise.

The EFC 9440 offers multiple speed settings, allowing users to adjust the extraction power according to their cooking needs. Whether you are simmering a delicate sauce or frying up a storm, you can easily control the ventilation to suit any cooking scenario. The intuitive control panel features easy-to-use buttons, enhancing user convenience and accessibility.

In terms of design, the Electrolux EFC 9440 boasts a sleek stainless-steel construction that not only adds a touch of elegance but also ensures durability and resistance to wear and tear. Its minimalist style blends seamlessly with various kitchen decors, making it a versatile choice for homeowners.

Another notable technology incorporated in the EFC 9440 is the built-in lighting system. The range hood is equipped with energy-efficient LED lights that illuminate the cooking area effectively, allowing for precise cooking and monitoring of food preparation. This feature is particularly useful for evening cooking, ensuring that you can see everything clearly without straining your eyes.

The EFC 9440 also emphasizes easy maintenance. The grease filters are dishwasher-safe, making it simple to clean and maintain the optimal performance of the range hood. Regular cleaning of these filters helps to maintain indoor air quality and prolong the life of the appliance.

In terms of dimensions, the Electrolux EFC 9440 is designed to fit various kitchen layouts, providing flexibility in installation. It can be mounted under cabinets or as a wall-mounted unit, catering to the specific needs of your kitchen design.

Overall, the Electrolux EFC 9440 combines style, functionality, and advanced technology, making it an ideal choice for anyone looking to enhance their kitchen environment. With its powerful extraction capabilities, customizable settings, and user-friendly design, the EFC 9440 stands out as a reliable and aesthetically pleasing kitchen appliance.