Charcoal filter
• The charcoal filter should only be used if you want to use the hood in the recirculation function.
• To do this you will need an original ELECTROLUX charcoal filter (available from your local Service Force Centre).
• This filter cannot be cleaned or reused.
• As a general rule, the activated charcoal filter should be changed once every four months.
• Fitting — Fig. 4
Fit one charcoal filter on the left and one on the right so to cover the plastic grids that protect the fan wheel, then turn clockwise the central handle of the charcoal filter.
• To remove proceed in the reverse order. | Fig. 4 | |
• Always specify the hood model code number | ||
| ||
and serial number when ordering replacement |
| |
filters. This information is shown on the |
| |
registration plate located on the inside of the |
| |
unit. |
| |
• The charcoal filter can be ordered from your |
| |
local ELECTROLUX Service Force Centre. |
|
Changing the light bulb
•Disconnect the cooker hood from the main supply.
•Remove the lamp cover.
•Replace the old bulb with a new one of the same type.
•Remount the lamp cover.
•If the light does not come on, make sure the bulb has been inserted in correctly before contacting your local Service Force Centre.
Changing the light bulb -
only models EFC 9405-9414 - 6405-6414
• Disconnect the cooker hood from the main | 34 |
|
supply. |
| |
• Remove the lamp cover, use a flat bladed screw |
| |
driver as a lever. Fig. 5. |
| |
• Replace the old bulb with a new one of the |
| |
same type. |
| |
• Refit the lamp cover. |
| |
• If the light does not come on, make sure the | Fig. 5 | |
bulb has been inserted correctly before | ||
contacting your local Service Force Centre. |