Special accessories
Active carbon filter
When the hood is used in recirculation mode an active carbon filter should be used.
Order by the retailer: PNC 942 120 182
Installation
Unpacking
Check that the cooker hood has no damages. Transportation damages should immediately be reported to the one responsible for the transport Damages, faults and eventually missing details should immediately be reported to the seller. Take care of the packing material so that small children cannot play with it.
Placement
The hood is to be mounted on the wall.
When installed, the hood must be not less than 65 cm. above electric burners or 75 cm. above gas or
Electrical connection | Fig. 3 |
The hood has a power cord with moulded plug with earth connection to be connected to a wall outlet of 230 V.
The power outlet should be
The power cord length is 1,25 m.
Min | Min | |
75 cm | ||
65 cm | ||
|
As it is then hard to disconnect the power plug for cleaning and service,
an easy accessible two pole switch should be fitted. The switch should conform to regulations with an opening distance between contacts of not less than 3 mm.
43