Fitting the Chimney Stack
The chimney consists of two sections. The upper chimney measures 215mm and the lower chimney (with the holes for recirculation on either side) measures 530mm.
1.Fit the two plastic supports provided into the two holes on top of the canopy as illustrated in Fig. 7.
2.Fit the upper section (S) first. Expand the chimney slightly to allow it to be fitted over the brackets 2, and then secure the chimney stack to brackets using the four self tapping screws provided as illustrated in Fig. 7.
3.Fit the lower chimney section (I) by expanding the chimney slightly to allow it to be fitted over the brackets 1, and the upper chimney section and bracket 2 as illustrated in Fig. 7.
4.Secure the bottom of the chimney to the plastic supports using the self tapping screws provided as illustrated in Fig. 7.
S
I
Fig.7
16