INSTALLING THE COOKER HOOD
2
S
1
I
A
C
R
D
B
(Optional Splashback B)
Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown.
All installations must comply with the local authorities requirements for the discharge of exhaust air.
Incorrect installation may affect the safety of this cooker hood.
Installation Requirements
Before installation check that the wall to which the cooker hood is to be fitted for electric cables, water pipes and gas.
This cooker hood is designed to be fixed to any vertical surface over a cooking area, and can be used in the extraction (ducted to the outside) or recirculation mode.
The installation work must be undertaken by a qualified and competent person.
The manufacturer disclaims any responsibility for damage due to incorrect installation of the cooker hood or if the hood is not installed in compliance with relevant regulations controlling this type of installation.
Unpacking
The cooker hood is supplied with the following components for installation:
•Ducting spigot 150 to 120mm (A)
•Canopy (C)
•Ducting Collar (D)
•Lower chimney stack 530mm (I)
•Recirculation spigot (R)
•Upper chimney stack 215mm (S)
Fixing kit comprising:
•Wall fixing brackets (1 and 2).
•Document pack.
11