Use, Cleaning the interior, Control Panel

28electrolux

USE

Cleaning the interior

Before using the appliance for the first time, wash the interior and all internal accessories with luke-warm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly.

Do not use detergents or abrasive powders, as these will damage the finish.

Control Panel

		1	2	3	4	5	6	7
1	Pilot light (green)				6	Schnellkühlen indicator light
2	ON/OFF switch					(yellow)
3	Temperature setting buttons					•Schnellkühlen for intensive fridge
	(for warmer temperatures)					cooling
	(for warmer temperatures)				7	Push button for Schnellkühlen
4	Temperature display				7	Push button for Schnellkühlen
4	Temperature display

5Temperature setting buttons (for colder temperatures)

Starting the appliance

•The temperature setting buttons are located at the top of the appliance on the control panel.

•Insert the plug into the plug socket.

•Press ON/OFF button (2).The green mains pilot indicator (1) illuminates.

•The interior lighting comes on. The

compressor starts and then runs automatically. To switch off the appliance, press the ON/OFF button (2) until the display goes off.

•Press either the “+” (3) or “-” (5) button. The temperature display switches over and the DESIRED temperature currently set flashes on the temperature display.