Electrolux U30205 manual Adjusting the dose

Page 16

Operating instructions

Adjusting the dose

According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1 minimum dosage, position 6 maximum dosage).

The dose is factory set in position 4.

Increase the dose if there are drops of water or lime spots on the dishes after washing.

Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades.

Top up the rinse aid when the indicator light on the control panel illuminates.

16

Image 16

Contents Favorit Auto Following symbols are used in the text Dear customerContents Installation Safety instructionsChild safety Your dishwasher in day-to-day use Disposal Economical and ecological dishwashingDescription of the appliance Delay start button Control panelDigital display indicates 1 buttonThis function can be selected with all washing programmes Dishwasher must be switched off Activation/deactivation of the rinse aid dispenserPrior to using for the first time Water softenerSetting manually Water hardnessExample Setting electronicallyExamples Filling with dishwasher salt To fillFilling with rinse aid Rinse aidEnsure that the lid is closed after every refill Adjusting the dose Daily use Loading cutlery and dishesPlastic items that are not heat resistant Lower basket Cutlery basket Removable knife basketUpper basket Case that plates are loaded in the upper basketAdjusting the height of the upper basket To move to the higher position proceed as followsUse of detergent Fill with detergentDetergent tablets Different kinds of detergentConcentrated detergent Use of 3 in 1 combi detergents Washing programmes ProgrammeSetting and starting the programme with the delay start Setting and starting the programmeStarting a washing programme Cancel a washing programme in progress To interrupt or cancel a washing programme in progressInterrupt a washing programme in progress End of the washing programme To cancel a delay startUnloading the dishwasher Maintenance and cleaning Cleaning the filtersNever try to remove the upper spray arm Prolonged periods of non-operation Frost precautionsMoving the machine Flashing fault code appears Something not workingThere are problems when operating the dishwasher Dishes are not clean Wash results are not satisfactoryDishes are wet and dull Water drops have dried onto glasses and dishesService and Spare Parts 08705Customer Care Department Major AppliancesGuarantee Conditions Standard Guarantee ConditionsThis guarantee does not cover ExclusionsEuropean Guarantee Technical specifications Electrical connectionLevelling Fitting under a counterProceed as follows Water supply connections Water inlet hose with safety valve Please take care when installing the water inlet hoseWater outlet hose connection Electrical connection Green and Yellow Earth BlueBrown Live Proceed as followsInstallation instructions Hints for test centres 06/06