Electrolux U30205 manual Installation instructions

Page 46

Installation instructions

The plug moulded onto the lead incorporates a 13amp BSI362 fuse. Only ASTA or BSI fuses should be used.

The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the plug.

A replacement cover/carrier must be obtained from your local Service Force Centre.

To isolate the dishwasher from mains, remove the mains plug.

Important!

The plug must still be accessible after the appliance has been installed.

The appliance should not be connected to the electrical supply by means of an extension cable.

In case that the electrical cable has to be replaced, please contact your local Service Force Centre.

Warning!

A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that it is disposed of safely.

46

Image 46

Contents Favorit Auto Following symbols are used in the text Dear customerContents Installation Safety instructionsChild safety Your dishwasher in day-to-day use Disposal Economical and ecological dishwashingDescription of the appliance Digital display indicates Delay start buttonControl panel 1 buttonThis function can be selected with all washing programmes Dishwasher must be switched off Activation/deactivation of the rinse aid dispenserPrior to using for the first time Water softenerSetting manually Water hardnessExample Setting electronicallyExamples Filling with dishwasher salt To fillFilling with rinse aid Rinse aidEnsure that the lid is closed after every refill Adjusting the dose Daily use Loading cutlery and dishesPlastic items that are not heat resistant Lower basket Cutlery basket Removable knife basketUpper basket Case that plates are loaded in the upper basketAdjusting the height of the upper basket To move to the higher position proceed as followsUse of detergent Fill with detergentDetergent tablets Different kinds of detergentConcentrated detergent Use of 3 in 1 combi detergents Washing programmes ProgrammeSetting and starting the programme with the delay start Setting and starting the programmeStarting a washing programme Cancel a washing programme in progress To interrupt or cancel a washing programme in progressInterrupt a washing programme in progress End of the washing programme To cancel a delay startUnloading the dishwasher Maintenance and cleaning Cleaning the filtersNever try to remove the upper spray arm Prolonged periods of non-operation Frost precautionsMoving the machine Flashing fault code appears Something not workingThere are problems when operating the dishwasher Dishes are wet and dull Dishes are not cleanWash results are not satisfactory Water drops have dried onto glasses and dishesService and Spare Parts 08705Customer Care Department Major AppliancesThis guarantee does not cover Guarantee ConditionsStandard Guarantee Conditions ExclusionsEuropean Guarantee Technical specifications Electrical connectionLevelling Fitting under a counterProceed as follows Water supply connections Water inlet hose with safety valve Please take care when installing the water inlet hoseWater outlet hose connection Brown Live Electrical connectionGreen and Yellow Earth Blue Proceed as followsInstallation instructions Hints for test centres 06/06