Electrolux FIDW 41 manual What to do, when, There are problems when operating the dishwasher

Page 13

What to do, when...

Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer.

...there are problems when operating the dishwasher

The dishwasher will not start or stops during operation. All push buttons are inoperative except for the On/Off push button. Open the door and press the On/Off push button to switch the dishwasher off and carry out the following suggested corrective actions.

Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will be made, even if the appliance is in guarantee.

Malfunction

Possible cause

Solutions

 

 

 

 

 

The machine does not fill with

The water tap is blocked or furred with

Clean the water tap.

limescale.

 

 

water.

 

 

 

 

 

 

 

The water tap is turned off.

Turn the water tap on.

 

 

 

 

 

 

 

The filter (where present) in the threaded hose

Clean the filter in the threaded hose

 

 

fitting at the water inlet valve is blocked.

fitting.

 

 

 

 

 

 

 

The water inlet hose has not been correctly laid

Check the water inlet hose connection.

 

 

or it is bent or squashed.

 

 

 

 

 

 

 

The dishwasher will not drain.

The siphon is blocked.

Clean out the siphon.

 

 

 

 

 

 

 

 

 

The water drain hose has not been correctly laid

Check the water drain hose connection.

 

 

or it is bent or squashed.

 

 

 

 

 

 

 

 

The dishwasher door has not been properly

Close the door.

 

 

closed.

 

 

 

 

 

 

 

The programme does not start

The main plug is not plugged in.

Insert the mains plug.

 

 

 

 

 

 

 

The fuse has blown in the household fuse box.

Replace the fuse.

 

 

 

There is a whistling noise during

The whistling is not a cause for concern.

Use a different brand of detergent.

washing

 

 

 

 

 

 

 

 

Once the checks have been carried out, press the On/Off push button and close the door, the programme will continue from the point in which it was interrupted. If the malfunction reappears contact your local Service Force Centre.

...the wash results are not satisfactory

The dishes are not clean

The wrong washing programme has been selected.

The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded.

The spray arms do not rotate freely due to wrong arrangement of the load.

The filters in the base of the washing compartment are dirty or incorrectly positioned.

Too little or no detergent has been used.

Where there are limescales deposits on the dishes; the salt container is empty or the wrong level of the water softener has been selected.

The drain hose connection is not correct.

The salt container cap is not properly closed.

The dishes are wet and dull

Rinse aid was not used.

The rinse aid dispenser is empty.

There are streaks, milky spots or a bluish coating on glasses and dishes

Decrease rinse aid dosing.

Water drops have dried onto glasses and dishes

Increase rinse aid dosing.

The detergent may be the cause. Contact the detergent manufacturer’s consumer care line.

13

Image 13
Contents Dishwasher Fidw Contents Installation Safety instructionsChild safety DisposalControl panel Description of the applianceSetting the water softener Prior to using for the first timeWater softener Filling with saltRinse aid Adjusting the doseFilling with rinse aid Loading cutlery and dishes Daily useLower basket Cutlery basketUpper basket Adjusting the height of the upper basketTo move to the higher position proceed as follows Different kinds of detergent Washing programmes Interrupting a washing programme in progress Operating sequenceEnd of the washing programme Unloading the dishwasherCleaning the filters Maintenance and cleaningFrost precautions Prolonged periods of non-operationWhat to do, when There are problems when operating the dishwasherWash results are not satisfactory Customer Care Department Service and Spare PartsStandard Guarantee Conditions Guarantee ConditionsEuropean Guarantee ExclusionsInstallation instructions Green and Yellow Earth Blue- Neutral Brown- Live Electrical connectionProceed as follows Hints for test centres Page 09/03

FIDW 41 specifications

The Electrolux FIDW 41 is a high-performance integrated dishwasher designed to cater to the modern kitchen's demands. This model combines user-friendly features with innovative technology, making dishwashing efficient and reliable.

One of the standout main features of the Electrolux FIDW 41 is its impressive capacity. It boasts a spacious interior that can accommodate up to 13 place settings, allowing users to tackle large loads effortlessly. Whether hosting dinner parties or managing daily family meals, this dishwasher ensures that everyone’s dishes are taken care of in one go.

The FIDW 41 is equipped with advanced cleaning technologies that elevate its performance. The unique SatelliteClean® technology utilizes rotating spray arms that provide superior coverage and ensure that every corner of the dishwasher is reached. This results in a thorough clean, even for items placed on the lower rack. Additionally, the dishwasher features a Soil Sensor that detects the level of dirtiness on the dishes and adjusts the wash cycle accordingly, optimizing water and energy usage.

Energy efficiency is a key characteristic of the Electrolux FIDW 41, earning it commendable energy ratings. With its eco-friendly design, it minimizes water consumption while maintaining exceptional cleaning results. Users can contribute to sustainability efforts without compromising on performance.

The dishwasher is also designed with user convenience in mind. Its intuitive control panel allows for easy operation, while the multiple wash programs cater to various cleaning needs, including a quick wash for lightly soiled items and an intensive cycle for heavily soiled pots and pans. Furthermore, the delay start function enables users to schedule washes at their convenience.

Noise levels are another consideration for modern appliances, and the FIDW 41 excels in this area with a low decibel rating, ensuring quiet operation that won't disturb household activities.

In summary, the Electrolux FIDW 41 is a versatile and feature-rich integrated dishwasher that combines advanced technology, energy efficiency, and a spacious interior to meet the needs of today's households. Its innovative cleaning systems, convenient features, and sleek design make it an excellent addition to any kitchen, delivering outstanding results with every wash.