Installation instructions

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Building-in

This dishwasher is designed to be fitted under a kitchen counter or worksurface.

Attention!

Carefully follow the instructions on the enclosed template for building in the dishwasher and fitting the furniture panel.

No further openings for the venting of the dishwasher are required, but only to let the water fill and drain hose and power supply cable pass through.

The dishwasher incorporates adjustable feet to allow the adjustment of the height.

During all operations that involve accessibility to internal components the dishwasher has to be unplugged.

When inserting the machine, ensure that the water inlet hose, the drain hose and the supply cable are not kinked or squashed.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

Fixing to the adjacent units

The dishwasher must be secured against tilting. Therefore make sure that the counter it is fixed under, is suitably secured to a fixed structure (adjacent kitchen units cabinets, wall).

Water supply connections

This dishwasher must be plumbed into a cold water supply.

For making the connection itself, the coupling nut fitted to the machine’s supply hose is designed to screw onto either a 3/4" inch gas thread spout or to a purpose made quick-coupling tap such as the Press-block.

The water pressure must be within the limits given in the "Technical specifications". Your local Water Authority will advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected up.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. (Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible).

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

Do not use, for connection, old hoses which have been used in another appliance.

The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations.

Water outlet hose connection

The end of the drain hose can be connected in the following ways:

1.To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine.

2.Hooked over the edge of the sink using the special curved plastic guide (if provided with the machine).

3.To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.

The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.

The drain hose can face either to the right or left of the dishwasher

Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water.

The sink plug must not be in place when the machine is draining as this could cause the water to siphon back into the machine.

If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided.

CS18

Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.

Attention!

Our appliances are supplied with a security device to protect against the return of dirty water back into the machine.

If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher.

We advise you therefore to remove it.

FIDW 41 specifications

The Electrolux FIDW 41 is a high-performance integrated dishwasher designed to cater to the modern kitchen's demands. This model combines user-friendly features with innovative technology, making dishwashing efficient and reliable.

One of the standout main features of the Electrolux FIDW 41 is its impressive capacity. It boasts a spacious interior that can accommodate up to 13 place settings, allowing users to tackle large loads effortlessly. Whether hosting dinner parties or managing daily family meals, this dishwasher ensures that everyone’s dishes are taken care of in one go.

The FIDW 41 is equipped with advanced cleaning technologies that elevate its performance. The unique SatelliteClean® technology utilizes rotating spray arms that provide superior coverage and ensure that every corner of the dishwasher is reached. This results in a thorough clean, even for items placed on the lower rack. Additionally, the dishwasher features a Soil Sensor that detects the level of dirtiness on the dishes and adjusts the wash cycle accordingly, optimizing water and energy usage.

Energy efficiency is a key characteristic of the Electrolux FIDW 41, earning it commendable energy ratings. With its eco-friendly design, it minimizes water consumption while maintaining exceptional cleaning results. Users can contribute to sustainability efforts without compromising on performance.

The dishwasher is also designed with user convenience in mind. Its intuitive control panel allows for easy operation, while the multiple wash programs cater to various cleaning needs, including a quick wash for lightly soiled items and an intensive cycle for heavily soiled pots and pans. Furthermore, the delay start function enables users to schedule washes at their convenience.

Noise levels are another consideration for modern appliances, and the FIDW 41 excels in this area with a low decibel rating, ensuring quiet operation that won't disturb household activities.

In summary, the Electrolux FIDW 41 is a versatile and feature-rich integrated dishwasher that combines advanced technology, energy efficiency, and a spacious interior to meet the needs of today's households. Its innovative cleaning systems, convenient features, and sleek design make it an excellent addition to any kitchen, delivering outstanding results with every wash.