Electrolux FAVORIT 40260 manual Adjust the Water Softener, Your area

Page 10

Operating Instructions

Adjust the Water Softener

To prevent the build up of scale on dishes and in the dishwasher, the dishes must be washed with soft, i.e. low lime content water. For this reason the dishwasher is fitted with a water softener in which tap water from a hardness of 4 °d (German degrees) is softened with the aid of special salt.

3

Your local water authority can advise you on the hardness of the water

 

in your area.

 

 

 

 

The water softener has 4 settings.

 

 

 

 

 

 

 

 

 

Water Hardness

Turn the arrow on the

 

 

in °d1)

in ppm 2)

water hardness switch to number

 

 

29-50

510 - 900

 

4

 

 

 

 

 

22-28

390 - 500

 

3

 

 

15-21

260 - 380

 

2*

 

 

4-14

70 - 250

 

1

 

 

under 4

under 70

 

1

 

 

 

no salt necessary

 

 

 

 

 

 

 

 

 

 

 

1)(°d) German degree, measure of water hardness 2)(ppm) Parts Per Million (CaCO3)

*factory setting

0Adjust the water softener in accord- ance with the table to suit your area:

1.Open the door on the dishwasher.

2. Remove the lower rack from the dishwasher.

3. Adjust the water hardness switch with, e.g. a coin.

4. Replace the lower rack and close the door of the dishwasher.

10

Image 10
Contents Favorit 40260 Please read these user instructions carefully Tips on using the applianceDear customer Pass them on to any subsequent owner of the applianceContents Installation and Connection Instructions Child Safety Safety InstructionsInstallation, Connection and Placing into Operation General SafetyCorrect Use Disposing of the Packaging Material Disposal Economical and Ecological Dishwashing Disposal of Old AppliancesAppliance Features and Control Panel Prior to using for the first time Control PanelAdjust the Water Softener Your areaOpen the door, remove the lower Rack Filling with Salt for the Water SoftenerFill with dishwasher salt Turning it anticlockwiseAge the appliance Filling with Rinse AidOugh rinsing, spot and streak free drying Fill with rinse aidAdjusting Rinse Aid Dosing Loading Cutlery and Dishes Daily UseNot be washed in the dishwasher Loading Cutlery Loading Pans, Frying Pans and Large Plates Load large and heavily soiled dishes in the lower rackLoading Cups, Glasses Coffee Services Filling with Detergent Fill with detergentSelecting the Wash Programme Programme Table Type of SoilingChanging/Interrupting the Wash Programme Starting the Wash ProgrammeChanging the wash programme Emptying the Dishwasher Care and CleaningSwitching Off the Dishwasher WasherCleaning the Filter There are problems with the operation of the dish- washer What to do, ifDishes are wet and dull Wash result is unsatisfactoryDishes are still dirty There are dried water drops on the glasses and dishesTechnical Data Sample loading arrangements Upper basket Lower basket with cutlery basketInstallation and Connection Instructions Installing the DishwasherWith the following dimensions See installation template suppliedDishwashers That Can Be Integrated Permitted water pressure Connecting the DishwasherWater Connection Connect the inlet hoseWater drain Leak Prevention System Appliance is automatically pumped outElectrical Connection Changing a fuseConnections Guarantee Conditions Customer Care 08705 929Calls may be recorded for training purposes AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG