Electrolux FAVORIT 40260 manual Electrical Connection, Changing a fuse

Page 32

Installation and Connection Instructions

Electrical Connection

	Any electrical work required to install this appliance should be car-
	ried out by a qualified electrician or competent person.
1	WARNING - This appliance must be earthed.
	The manufacturer declines any responsibility should these safety

measures not be observed.

Before switching on make sure the electricity supply voltage is the same as that indicated on the appliance rating plate.

To isolate the dishwasher from the mains, remove the mains plug. Important: The plug must still be accessible after the appliance has been installed.

Changing a fuse

The appliance is supplied with a 13amp plug fitted. In the event of hav- ing to change the fuse in the plug supplied, a 13amp ASTA approved (BS 1363A) fuse must be used.

Should the plug need to be replaced for any reason, proceed as described below.

The wires on the mains lead are coloured in accordance with the following code.

Green

& Yellow

BlueBrown

Green and Yellow : Earth

Blue	: Neutral
Brown	: Live

Cord Clamp

•The wire coloured green and yellow must be connected to the termi-

nal marked with the letter “E“ or by the earth symbol or coloured green and yellow.

•The wire coloured blue must be connected to the terminal “N“ or col- oured black.

•The wire coloured brown must be connected to the terminal marked “L“ or coloured red.

•Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.

1WARNING! A cut off plug inserted into a 13 amp socket is a seri- ous safety (shock) hazard. Ensure that, if it is necessary to cut off the plug, it is disposed of safely and not retained.

32

Image 32

Contents Favorit 40260 Tips on using the appliance Dear customerPlease read these user instructions carefully Pass them on to any subsequent owner of the applianceContents Installation and Connection Instructions Safety Instructions Installation, Connection and Placing into OperationChild Safety General SafetyCorrect Use Disposal Economical and Ecological DishwashingDisposing of the Packaging Material Disposal of Old AppliancesAppliance Features and Control Panel Prior to using for the first time Control PanelAdjust the Water Softener Your areaFilling with Salt for the Water Softener Fill with dishwasher saltOpen the door, remove the lower Rack Turning it anticlockwiseFilling with Rinse Aid Ough rinsing, spot and streak free dryingAge the appliance Fill with rinse aidAdjusting Rinse Aid Dosing Not be washed in the dishwasher Daily UseLoading Cutlery and Dishes Loading Cutlery Loading Pans, Frying Pans and Large Plates Load large and heavily soiled dishes in the lower rackLoading Cups, Glasses Coffee Services Filling with Detergent Fill with detergentSelecting the Wash Programme Programme Table Type of SoilingChanging the wash programme Starting the Wash ProgrammeChanging/Interrupting the Wash Programme Care and Cleaning Switching Off the DishwasherEmptying the Dishwasher WasherCleaning the Filter There are problems with the operation of the dish- washer What to do, ifWash result is unsatisfactory Dishes are still dirtyDishes are wet and dull There are dried water drops on the glasses and dishesTechnical Data Sample loading arrangements Upper basket Lower basket with cutlery basketInstallation and Connection Instructions Installing the DishwasherDishwashers That Can Be Integrated See installation template suppliedWith the following dimensions Connecting the Dishwasher Water Connection Permitted water pressure Connect the inlet hoseWater drain Leak Prevention System Appliance is automatically pumped outElectrical Connection Changing a fuseConnections Guarantee Conditions Calls may be recorded for training purposes 08705 929Customer Care AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG