Electrolux ESL 46010 user manual Interrupt a washing programme in progress

Page 25

Select and start a washing programme

Select the washing programme and delay start with the door slightly opened. The start of the programme or the countdown of

the delay start will occur only after the closure of the door. Until then it is possible to modify the settings.

1.Check that the baskets have been loaded correctly and that the spray arms are free to rotate

2.Check that the water tap is opened

3.Press the On/Off button. The dishwasher must be in setting mode.

4.Press the button corresponding to the required programme (see "Washing programmes" chart).

Close the dishwasher door, the programme starts automatically.

Setting and starting the programme with "delay start"

1.After having selected the washing programme, press the delay start button until the number of hours for the delay start will appear in the digital display. The commencement of the selected washing programme can be delayed from 1 to 19 hours.

2.Close the dishwasher door, the countdown starts automatically.

3.The countdown will decrease with steps of 1 hour.

daily use electrolux 25

4.The opening of the door will interrupt the countdown. Close the door; the countdown will continue from the point at which it was interrupted.

5.Once the delay start has elapsed the programme will start automatically.

Interrupt or cancel a washing programme in progress ONLY if it’s absolutely necessary.

Attention! Hot steam may escape when the door is opened. Open the door carefully.

Interrupt a washing programme in progress:

Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point at which it was interrupted.

Cancel a washing programme in progress

Simultaneously press and hold the two programme buttons positioned

over the word Cancel , until all the programme button lights illuminate. The washing programme has been cancelled.

If a new washing programme is to be selected, check that there is detergent in the detergent dispenser.

Image 25
Contents Dishwasher ESL We were thinking of you Welcome to the world of Electrolux Contents General safety Safety informationCorrect use Installation Child safetyProduct description Control panel Salt Rinse aid Multi-tab function Indicator lightsSetting mode Setting of the water softener End of programme Audible signalsFactory setting Set the water softener First useClarke Setting electronically Setting manuallyExamples To fill Filling with dishwasher saltFirst time Only use branded rinse aid for dishwashers Filling with rinse aidLoading cutlery and dishes Daily useDaily use Lower basket Cutlery basket Upper basket Maximum height of the dishes Adjusting the height of the upper basketTo move to the higher position Proceed as follows Fill with detergent Use of detergentDetergent tablets Activation/deactivation of the Multi- tab function Activation/deactivation of the rinse aid dispenser Interrupt a washing programme in progress End of the washing programme Cancelling the delay startUnloading the dishwasher Programme Washing programmesProgramme description Washing programmes informationCleaning the filters Care and cleaningFrost precautions External cleaningMoving the machine Something not working Possible cause and solutionMalfunction Wash results are not satisfactory Dishes are not clean Dishes are wet and dullTechnical data Minutes Consumption values ProgrammeKWh LitresHints for test institutes Full load 9 standard place settingsFixing to the adjacent units InstallationLevelling Water supply connectionsWater inlet hose with safety valve Plastic membrane a must be Water outlet hose connectionElectrical connection Packaging material Environment concernsOld appliance Standard guarantee conditions Guarantee/Customer ServiceService and Spare Parts ExclusionsCustomer Care European guaranteeAlbania Electrolux Electrolux Electrolux Page 117989 54/0-00-21022007