Electrolux ESL 46010 user manual Electrical connection

Page 39

installation electrolux 39

Electrical connection

Safety standards require the appliance to be earthed.

Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be found on the rating plate.

Always plug the mains plug into a correctly installed shockproof socket.

Multi-way plugs, connectors and extension cables must not be used. This could constitute a fire hazard through overheating.

If necessary, have the domestic wiring system socket replaced. In case that the electrical cable has to be replaced, contact your local Service Force centre.

The plug must be accessible after the appliance has been installed.

Never unplug the appliance by pulling on the cable. Always pull the plug.

The manufacturer accepts no liability for failure to observe the above safety precautions.

Image 39

Contents Dishwasher ESL We were thinking of you Welcome to the world of Electrolux Contents Safety information General safetyCorrect use Installation Child safetyProduct description Control panel Salt Rinse aid Multi-tab function Indicator lightsSetting mode Audible signals Setting of the water softener End of programmeFactory setting First use Set the water softenerClarke Setting manually Setting electronicallyExamples Filling with dishwasher salt To fillFirst time Only use branded rinse aid for dishwashers Filling with rinse aidLoading cutlery and dishes Daily useDaily use Lower basket Cutlery basket Upper basket Adjusting the height of the upper basket Maximum height of the dishesTo move to the higher position Proceed as follows Use of detergent Fill with detergentDetergent tablets Activation/deactivation of the Multi- tab function Activation/deactivation of the rinse aid dispenser Interrupt a washing programme in progress Cancelling the delay start End of the washing programmeUnloading the dishwasher Washing programmes information Washing programmesProgramme Programme descriptionCleaning the filters Care and cleaningExternal cleaning Frost precautionsMoving the machine Something not working Possible cause and solutionMalfunction Wash results are not satisfactory Dishes are not clean Dishes are wet and dullTechnical data Litres Consumption values ProgrammeMinutes KWhHints for test institutes Full load 9 standard place settingsWater supply connections InstallationFixing to the adjacent units LevellingWater inlet hose with safety valve Plastic membrane a must be Water outlet hose connectionElectrical connection Environment concerns Packaging materialOld appliance Exclusions Guarantee/Customer ServiceStandard guarantee conditions Service and Spare PartsCustomer Care European guaranteeAlbania Electrolux Electrolux Electrolux Page 117989 54/0-00-21022007