Electrolux ZKI1410 user manual Installation, Water connection, Water inlet hose with safety valve

Page 21

cup racks: position A

Installation

WARNING!

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or compe- tent person.

Water connection

WARNING!

The dishwasher must not be connected to open water appliances or instantaneous water heat- ers. This dishwasher may be fed with either hot (max. 60°) or cold water. Nevertheless we ad- vise you a cold water supply.

WARNING!

Only use, for connection to the water mains, new hose-set; old hose-set must not be reused.

CAUTION!

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes be- fore connecting the inlet hose.

Water inlet hose with safety valve

Connect the inlet hose to a water tap with an external thread of 3/4”.

After connecting the double-walled water inlet hose, the safety valve is next to the tap.

If the water inlet hose leaks, the safety valve cuts off the water supply.

21

Image 21

Contents Dishwasher ZKI1410 Contents General safety Safety informationChild safety Correct useControl panel InstallationWashing programmes Indicator lightsDegree of soil First useType of load Programme descriptionSalt function and other additives Set the water softenerWater hardness Mmol/l Use of saltSetting the water softener electronically see table Setting the water softener manually see tableUse only special salt suitable for dishwashers Filling with dishwasher saltFilling with rinse aid Adjusting the dosage of rinse aidLoading cutlery and dishes Are of limited suitability Maximum height of the dishes Adjusting the height of the upper basketUpper basket Lower basketUse of detergent Unloading the dishwasherDetergent tablets Care and cleaning Cleaning the filtersCleaning the spray arms Environmental concerns Fault code and malfunction Possible cause and solutionSomething not working Programme does not start Wash results are not satisfactory Technical dataFull load 12 standard place settings Consumption valuesHints for test institutes Installation Water inlet hose with safety valveWater connection Electrical connection Drain hoseLevelling Fitting under a counter156989460-00-042008