Electrolux ESF 64010 user manual Never try to remove the upper spray arm, External cleaning

Page 27

Under no circumstances may the dishwasher be used without filters. Incorrect repositioning and fitting of the filters will produce poor washing results.

NEVER try to remove the upper spray arm.

If residues of soil have clogged the holes in the upper spray arm, remove them with a cocktail stick.

External cleaning

Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....).

Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth.

We recommend every 3 months to run a 65°C wash programme without dishes using detergent.

care and cleaning electrolux 27

Prolonged periods of non- operation

If you are not using the machine for any period of time you are advised to:

1.Unplug the appliance and then turn off the water.

2.Leave the door ajar to prevent the formation of any unpleasant smells.

3.Leave the inside of the machine clean.

Frost precautions

Avoid placing the machine in a location where the temperature is below 0°C. If this is unavoidable, empty the machine, close the appliance door, disconnect the water inlet pipe and empty it.

Moving the machine

If you have to move the machine (moving house etc....):

1.Unplug it.

2.Turn the water tap off.

3.Remove the water inlet and discharge hoses.

4.Pull the machine out together with the hoses.

Avoid over tilting the machine during transportation.

Image 27
Contents Dishwasher ESF We were thinking of you Welcome to the world of Electrolux Contents Correct use Safety informationGeneral safety Child safetyInstallation Product description Control panel Wash Dry End of programme Salt Rinse aid Indicator lightsTo cancel a set programme or a programme in progress Setting modeWater hardness Adjusting the water Hardness setting Mmol/l First useUse Salt Setting manually Dishwasher is factory set at position Setting electronically Dishwasher is factory set at levelExamples To fill Filling with dishwasher saltFilling with rinse aid Loading cutlery and dishes Daily useElectrolux daily use Lower basket Electrolux daily use Upper basket To move to the higher position proceed as follows Adjusting the height of the upper basketMaximum height of the dishes Upper Basket Lower BasketUse of detergent Fill with detergentDetergent tablets Use of combi detergent tablets Cancelling the delay start Setting and starting the programme with delay start Unloading the dishwasher Cancel a washing programme in progress End of programme indicator light will illuminate End of the washing programmeWashing programmes ProgrammeType of load Programme description Soil Cleaning the filters Care and cleaningProlonged periods of non- operation External cleaningFrost precautions Never try to remove the upper spray armMalfunction Fault codeSolution Something not workingFault code Malfunction Wash results are not satisfactory Dishes are not clean Dishes are wet and dullTechnical data Water Consumption Litres Consumption values ProgrammeProgramme Duration Minutes Energy Consumption KWhHints for test institutes Full load 12 standard place settingsLevelling InstallationFitting under a counter kitchen worktop or sink Proceed as followsLocknut must be correctly fitted to avoid water leaks Water supply connectionsWater outlet hose connection Installation electrolux Environment concerns Packaging materialOld appliance Belgium Guarantee/Customer ServiceElectrolux Service Address for our consumer services department BelgiumLuxembourg European guaranteeAlbania Belgique/België/Belgien Page 156998 62/0-00-21082006