Connecting the Portable Dishwasher

The portable dishwasher must be connected to a faucet and electrical outlet each time it is used. Follow directions on this page to properly connect dishwasher.

Faucet Adapter Assembly (Figure A)

Connecting the Portable

Faucet Adapter Assembly

(Figure B)

CAUTION

Electric Shock

Hazard

Avoid fire hazard or electrical shock. Do not use an adapter plug, extension cord or remove grounding prong from electrical power cord. Failure to follow this warning can cause serious injury, fire or death.

IMPORTANT: Make sure door is latched before moving dishwasher.

The power cord and faucet coupler with hoses are located in a compartment in back of dishwasher. A special adapter must be installed on faucet before you can connect dishwasher (Figure A).

1.Remove faucet adapter assembly from literature package.

2.Unscrew existing sink faucet aerator.

3.Check faucet spout to see if threads are inside or outside.

•If threads are on inside of faucet spout, use both rubber washers.

•If threads are on outside of faucet spout, use one rubber washer only.

•If faucet has no threads, an adapter kit with instructions for attachment to a non-threaded spout is available at most hardware stores.

4.Assemble faucet spout as shown in Figure A.

1.Run water at faucet until it is hot. Turn off faucet. 2.Pull hoses out of compartment.

3.Push collar down and slip faucet connector onto faucet adapter (Figure B). 4.When connector snaps into place, release collar.

5.Slowly turn on hot water all the way. 6.Plug power cord into grounded outlet.

Disconnecting the Portable Dishwasher

1.When cycle has finished, unplug power cord and return it to compartment. 2.Turn off hot water.

3.Press red button on coupler to release water pressure.

4.Press down on collar to release coupler.

5.Empty remaining water from coupler and return it to compartment.

IMPORTANT: A sink spray hose can burst due to constant water pressure while in use. If your spray hose is installed on same water line as the dishwasher, it is your responsibility to disconnect sink's spray hose and to plug hole.

Electrical Connection for a Portable Dishwasher

An electrical supply of 120 volts, 60 Hz, AC only, 15 amps is required. For your safety, the dishwasher must be grounded. If there is a malfunction or breakdown, grounding will reduce risk of electrical shock. This dishwasher has a power cord with a 3-prong grounding plug. It must be plugged into a mating 3-prong grounding type receptacle, installed and grounded in accordance with the National Electrical Code and any local codes and ordinances.

2001/05, 6.75E+11 specifications

Electrolux 6.75E+11, introduced in 2001, represents a notable advancement in household appliance technology, particularly in the realm of washing machines. This model is designed to cater to the needs of modern households, combining efficiency, convenience, and performance.

One of the primary features of the Electrolux 6.75E+11 is its 6.75 kg washing capacity, which is suitable for average-sized families and makes it an efficient option for handling day-to-day laundry loads. The model's compact design allows it to fit seamlessly into various laundry spaces, whether in apartments or larger homes, where space may be a concern.

In terms of technology, the Electrolux 6.75E+11 is equipped with advanced washing programs that cater to a wide range of fabric types and laundry needs. From delicate fabrics to heavy-duty items, this washing machine comes with multiple settings that ensure optimal cleaning while maintaining the integrity of the clothes. The presence of an intelligent load sensor is particularly noteworthy, as it adjusts water levels based on the load size, promoting water conservation and enhancing cost efficiency.

Another significant characteristic of this model is its energy efficiency. The Electrolux 6.75E+11 complies with high energy efficiency ratings, which not only helps users save on utility bills but also reduces the environmental impact of laundry practices. This focus on sustainability is evident through its low water usage and efficient energy consumption during wash cycles.

Additionally, the machine is designed with user convenience in mind. A user-friendly control panel enables easy navigation between wash programs, and options such as timed washes and delayed start make it adaptable to various schedules. The quiet operation of the machine ensures that it can be used at any time of day without causing disturbances.

Furthermore, the Electrolux 6.75E+11 incorporates features aimed at enhancing longevity and reliability. Its robust construction and high-quality materials contribute to the durability of the appliance, ensuring it withstands repeated use over its lifespan.

Overall, the Electrolux 6.75E+11 washing machine from 2001 remains a solid choice for those seeking efficiency and reliability in their laundry routines. With its combination of innovative technologies, user-friendly features, and energy-conscious design, it serves as a testament to Electrolux's commitment to quality and customer satisfaction in the home appliance market.