Factors Affecting Performance, Rinse AID

Factors Affecting Performance

RINSE AID

Rinse aid greatly improves drying and reduces water spots and filming. Water “sheets” off dishes rather than forming water droplets that cling and leave spots.

The dispenser, located next to the detergent cup, automatically releases a measured amount of rinse aid during the last rinse. If spotting and poor drying are problems, increase the amount of rinse aid dispensed by rotating the dial to a higher number. The dial is located under the dispenser cap. The indicator will be dark when full and will show clear when it is time to refill.

To add liquid rinse aid, turn dispenser cap 1/4 turn counterclockwise adn lift out. Pour in rinse aid until liquid touches the indicated fill level. Replace cap.

Do not overfill since this can cause oversudsing. Wipe up any spills with a damp cloth.

The dispenser holds enough for 35 to 140 washes, depending on setting.

Dispenser Opening

Indicator

Rinse Aid

Less More

Adjustable setting

Water Pressure

Water pressure should be between 20 and 120 pounds per square inch. Low water pressure occurs most often during periods of high water consumption, such as when laundry or showers are being done. To determine if you have enough water pressure, put a 2 quart container under fully opened hot water faucet nearest the dishwasher. It should fill in less than 14 seconds. Be sure all other faucets are turned off during test.

Water Temperature

Hot water is needed for best dishwashing and drying results. Water entering dishwasher should be at least 120°F (49°C) to give satisfactory results.

To check water temperature entering dishwasher:

•Turn on hot water faucet nearest dishwasher for several minutes to clear cool water from pipes.

•Hold a candy or meat thermometer in stream of water to check the temperature.

•If temperature is below 120°F (49°C), have a qualified person raise the hot water heater thermostat setting.

Important: Before starting a cycle, run hot water to clear cool water from pipe.

Not selecting the AIR DRY option in combination with rinse aid will enhance drying performance. The energy required to use the AIR DRY option costs pennies per cycle. You may choose to select the AIR DRY option; however you will have items in your dish load that will not be completely dry at the end of the cycle.

Dispenser Cap

2001/05, 6.75E+11 specifications

Electrolux 6.75E+11, introduced in 2001, represents a notable advancement in household appliance technology, particularly in the realm of washing machines. This model is designed to cater to the needs of modern households, combining efficiency, convenience, and performance.

One of the primary features of the Electrolux 6.75E+11 is its 6.75 kg washing capacity, which is suitable for average-sized families and makes it an efficient option for handling day-to-day laundry loads. The model's compact design allows it to fit seamlessly into various laundry spaces, whether in apartments or larger homes, where space may be a concern.

In terms of technology, the Electrolux 6.75E+11 is equipped with advanced washing programs that cater to a wide range of fabric types and laundry needs. From delicate fabrics to heavy-duty items, this washing machine comes with multiple settings that ensure optimal cleaning while maintaining the integrity of the clothes. The presence of an intelligent load sensor is particularly noteworthy, as it adjusts water levels based on the load size, promoting water conservation and enhancing cost efficiency.

Another significant characteristic of this model is its energy efficiency. The Electrolux 6.75E+11 complies with high energy efficiency ratings, which not only helps users save on utility bills but also reduces the environmental impact of laundry practices. This focus on sustainability is evident through its low water usage and efficient energy consumption during wash cycles.

Additionally, the machine is designed with user convenience in mind. A user-friendly control panel enables easy navigation between wash programs, and options such as timed washes and delayed start make it adaptable to various schedules. The quiet operation of the machine ensures that it can be used at any time of day without causing disturbances.

Furthermore, the Electrolux 6.75E+11 incorporates features aimed at enhancing longevity and reliability. Its robust construction and high-quality materials contribute to the durability of the appliance, ensuring it withstands repeated use over its lifespan.

Overall, the Electrolux 6.75E+11 washing machine from 2001 remains a solid choice for those seeking efficiency and reliability in their laundry routines. With its combination of innovative technologies, user-friendly features, and energy-conscious design, it serves as a testament to Electrolux's commitment to quality and customer satisfaction in the home appliance market.