14Prior to using for the first time
Activating rinse aid inflow when 3in1 function is selected
3If the 3in1 function is not selected, the rinse aid inflow is always activated.
If the 3in1 function is selected due to the use of 3in1 detergent, the rinse aid in flow is deactivated. If the dishes then do not dry sufficiently, you should recti vate the rinse aid inflow (see also section “Using 3in1 detergents”).
1.Press the ON/OFF button.
3If the only LED indicator illuminated is one that belongs to a programme button, this means that this dishwashing cycle has been activated. The dishwashing cy cle must be deselected:
Press function buttons 1 and 2 simultaneously for approx. 2 seconds.
The LED indicators of all the programme buttons that can be selected light up.
2.Press function buttons 1 and 2 simultaneously and keep them pressed. The LED indicators for function buttons 1 to 3 will flash.
3.Press function button 2.
The LED indicator for function button 2 will flash. The multiy will indicate the current setting:
0d | Rinse aid inflow deactivated when 3in1 on (factory setting) |
1d | Rinse aid inflow activated when 3in1 on |
|
|
4.Pressing function button 2 activates and deactivates the rinse aid dispensing function.
5.Once the multiisplay is indicating the required setting, press the ON/OFF but ton. The setting is now saved.