Electrolux 50870 user manual Filling with dishwasher salt, To fill

Filling with dishwasher salt 13

4.To change the level, press button A. Each time the button is pressed the level changes. (For the selection of the new level see the chart)..

Examples: if the current level is 5, by pressing button A once, level 6 is selected. if the current level is 10, by pressing button A once, level 1 is selected.

5.To memorise the operation, switch off the dishwasher by pressing the On/Off button.

Filling with dishwasher salt

WARNING!

Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been spilt, remaining on the bottom of the machine for any period of time, which may cause corrosion.

To fill:

1.Open the door, remove the lower basket and unscrew the cap of the salt container by turning it anticlockwise.

2.Pour 1 litre of water inside the container (this is necessary only before filling with salt for the first time) .

3. Using the funnel provided, pour in the salt until the container is full.

4. Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket.

5. Replace the cap tightly turning it clockwise until it stops with a click.

Do not worry if water overflows from the unit when filling with salt, this is quite normal.

The salt indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuming the dishwasher remains switched on. If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected.