OPERATION

About AUTO CHANGEOVER Operation

AUTO: ● When AUTO CHANGEOVER operation first selected, the fan will oper- ate at very low speed for about one minute, during which time the unit detects the room conditions and selects the proper operating mode.

If the differance between thermostat setting and actual room tempera- ture is more than +4 °F → Cooling

If the difference between thermostat setting and actual room tempera- ture is within ±4 °F → Monitor operation

If the difference between thermostat setting and actual room tempera- ture is more than –4 °F → Heating operation

●When the air conditioner has adjusted your room’s temperature to near the thermostat setting, it will begin monitor operation. In the monitor operation mode, the fan will operate at low speed. If the room tem- perature subsequently changes, the air conditioner will once again select the appropriate operation (Heating, Cooling) to adjust the tem- perature to the value set in the thermostat.

(The monitor operation range is ±4 °F relative to the thermostat setting.)

●If the mode automatically selected by the unit is not what you wish, select one of the mode operation (HEAT, COOL, DRY, FAN).

About Mode Operation

Heating: ● Use to warm your room.

●When Heating mode is selected, the air conditioner will operate at very low fan speed for about 3 to 5 minutes, after which it will switch to the selected fan setting. This period of time is provided to allow the indoor unit to warm up before beginning full operation.

●When the room temperature is very low, frost may form on the outside unit, and its performance may be reduced. In order to remove such frost, the unit will automatically enter the defrost cycle from time to time. During Automatic Defrosting operation, the OPERATION indica- tor lamp (red) will flash, and the heat operation will be interrupted.

Cooling: ● Use to cool your room.

Dry: ● Use for gently cooling while dehumidifying your room.

●You cannot heat the room during Dry mode.

●During Dry mode, the unit will operate at low speed; in order to adjust room humidity, the indoor unit’s fan may stop from time to time. Also, the fan may operate at very low speed when adjusting room humidity.

●The fan speed cannot be changed manually when Dry mode has been selected.

Fan: ● Use to circulate the air throughout your room.

During Heating mode:

Set the thermostat to a temperature set- ting that is higher than the current room temperature. The Heating mode will not operate if the thermostat is set lower than the actual room temperature.

During Cooling/Dry mode:

Set the thermostat to a temperature set- ting that is lower than the current room temperature. The Cooling and Dry modes will not operate if the thermostat is set higher than the actual room temperature (in Cooling mode, the fan alone will oper- ate).

During Fan mode:

You can not use the unit to heat and cool your room.

En-6

Page 6 Page 8
Page 7
Image 7
Fujitsu ASU9RMLQ ASU12RMLQ AOU24RML AOU36RML manual About Auto Changeover Operation, About Mode Operation
Page 6 Page 8

ASU9RMLQ ASU12RMLQ AOU24RML AOU36RML specifications

Fujitsu is a prominent player in the HVAC industry, delivering energy-efficient and advanced climate control solutions. Among their extensive product lineup, the ASU9RMLQ, ASU12RMLQ, AOU24RML, and AOU36RML represent cutting-edge technology specifically designed to cater to diverse cooling and heating needs in residential and commercial spaces.

The Fujitsu ASU9RMLQ and ASU12RMLQ are wall-mounted indoor units that are well-suited for smaller residential settings. These models are known for their sleek design, ensuring they blend seamlessly into any environment. Their main features include a high energy efficiency rating, achieving SEER ratings of up to 18, which translates to significant cost savings on energy bills. Both models are equipped with Inverter technology, allowing them to adjust the compressor speed as needed, thus providing consistent temperature control while minimizing energy consumption.

Additionally, these indoor units are designed with advanced filtration systems that enhance air quality by removing dust, allergens, and other pollutants. The easy-to-use remote controls enable users to adjust settings conveniently, while the quiet operation ensures minimal disruption during use.

On the other hand, the AOU24RML and AOU36RML are outdoor units designed to provide robust cooling and heating performance. They are engineered to work in conjunction with their respective indoor counterparts, offering a comprehensive climate control system. The AOU24RML is capable of cooling larger spaces with its powerful output, while the AOU36RML excels in extensive areas, making it ideal for commercial applications.

Both outdoor units feature enhanced durability, built to withstand various weather conditions. They employ advanced compressor technology that optimizes performance and energy efficiency. The incorporation of smart technology allows for remote management through smartphone applications, adding an extra layer of convenience for users.

In summary, the Fujitsu ASU9RMLQ, ASU12RMLQ, AOU24RML, and AOU36RML are distinguished by their ability to provide effective and energy-efficient climate control. With features such as Inverter technology, advanced filtration, and responsive control systems, these units represent a smart investment for anyone looking to enhance their indoor environment while being mindful of energy consumption. Whether for residential or commercial spaces, these Fujitsu models deliver reliability and innovation in HVAC solutions.
Top Page Image Contents