Fujitsu ASU9RMLQ ASU12RMLQ AOU24RML AOU36RML En-18, Multi-typeAir conditioner, Operating Tips

OPERATING TIPS

Multi-type Air conditioner

This indoor unit can be connected to a multi-type outdoor unit. The multi-type air conditioner allows multiple indoor units to be operated in multiple locations. The indoor units may be operated simultaneously, in accordance with their respective output.

Simultaneous Use of Multiple Units

●When using a multi-type air conditioner, the multiple indoor units can be operated simultaneously, but when two or more indoor units of the same group are oper- ated simultaneously, the heating and cooling efficiency will be less than when a single indoor unit is used alone. Accordingly, when you wish to use more than one in- door unit for cooling at the same time, the use should be concentrated at night and other times when less out- put is required. In the same way, when multiple units are used simultaneously for heating, it is recommended that they be used in conjunction with other auxiliary space heaters, as required.

●Seasonal and outdoor temperature conditions, the struc- ture of the rooms and the number of persons present may also result in differences of operating efficiency. We recommend that you try various operating patterns in order to confirm the level of heating and cooling out- put provided by your units, and use the units in the way that best matches your family’s lifestyle.

●If you discover that one or more units delivers a low level of cooling or heating during simultaneous opera- tion, we recommend that you stop simultaneous opera- tion of the multiple units.

●Operation cannot be done in the following different op- erating modes.

If the indoor unit is instructed to do an operating mode that it cannot perform, the OPERATION indicator lamp (red) on the indoor unit will flash (1 second on, 1 sec- ond off) and the unit will go into the standby mode.

Heating (COIL DRY) mode and cooling mode (or dry mode)

Heating (COIL DRY) mode and fan mode

●Operation can be done in the following different operat- ing modes.

Cooling mode and dry mode

Cooling mode and fan mode

Dry mode and fan mode

Heating mode and COIL DRY mode

●The operating mode (heating (COIL DRY) mode or cool- ing (dry) mode) of the outdoor unit will be determined by the operating mode of the indoor unit that was oper- ated first. If the indoor unit was started in fan mode, the operating mode of the outdoor unit will not be deter- mined.

For example, if indoor unit (A) was started in fan mode and then indoor unit (B) was then operated in heating mode, indoor unit (A) would temporarily start opera- tion in fan mode but when indoor unit (B) started oper- ating in heating mode, the OPERATION indicator lamp (red) for indoor unit (A) would begin to flash (1 second on, 1 second off) and it would go into standby mode. Indoor unit (B) would continue to operate in heating mode.

Notice

●During use of the heating mode, the outdoor unit will occasionally commence the defrost operation for brief periods. During the defrosting operation, if the user sets the indoor unit for heating again, the defrosting mode will continue, and the heating operation will begin after completion of defrosting, with the result that some time may be required before warm air is emitted.

●During use of the heating mode, the top of the indoor unit may become warm, but this is due to the fact that coolant is circulated through the indoor unit even when it is stopped; it is not a malfunction.

Temperature and Humidity Range

		Cooling/Dry Mode		Heating Mode
Outdoor temperature		About 32 to 115 °F		About 14 to 75 °F
Indoor temperature		About 64 to 90 °F		88 °F or less
	Outdoor temperature	About 80% or less	If the unit is used for long pe-
	68 °F or above		riods under high-humidity
Indoor Humidity			conditions, condensation may
			form on the surface of the in-
	Outdoor temperature	About 50% or less
			door unit, and drip onto the
	below 68 °F		floor or other objects under-
			neath.

En-18