How to install or remove the Air- cleaning and Deodorizing filter
1.Remove the dust-collecting unit.
●Please consult steps 1 and 2 of cleaning the dust- collecting unit on page 13.
2.Install or remove the Air-cleaning and
Deodorizing filter into the unit.
1Open the filter case inside the
Hook
Hook
Filter case
2Insert or remove the
Install
Filter
Remove
3Close the filter case.
Filter Case
“Click”
Hook“Click”
Hook
●Please ensure that the filter case is properly closed. If the filter case is not properly closed, the filter could fall out.
3.Install the dust-collection unit.
●Please consult steps 4, 5 and 6 of cleaning the dust- collection unit on page 14.
❇When removing the filter, please follow these steps backwards.
Air-cleaning and Deodorizing filter maintenance
As well as ensuring the maintenance of the dust collecting unit, please also take care of the filter.
(Please carry out maintenance on the filter every 6 months.)
1.Take out the unit and remove the Air- cleaning and Deodorizing filter.
●Please consult steps 1,
2.Air-dry after washing.
1Wash using lukewarm or warm water. If quite dirty, wash using a mild detergent.
Please do not rub the filter, it may cause its Air- cleaning performance to be reduced.
2Rinse it under running water.
3 Allow it to dry thoroughly in a shaded place.
3.Install the Air-cleaning and Deodorizing filter.
●Please consult step
4.Install the air filter and close the intake grille.
●Please consult step 3 of cleaning the air filter on page 12.
Regarding the
●Please change the filter approximately every 2 years to ensure good
When changing the filter, please make sure you pur- chase the correct model (type F – Y5787).
●Please only install filters that are licensed by our com- pany.
●Regarding storage and care of the filter, please avoid exposing it to high temperatures and high humidity. Also, use it as soon as possible after opening its pack- aging.
