OPERATION
To Select Mode Operation
1
2
Press the START / STOP button (Fig.5 J).
The indoor unit’s OPERATION indicator lamp (red) (Fig. 3 5) will light.
The air conditioner will start operating.
Press the MASTER CONTROL button (Fig.5 E) to se- lect the desired mode.
Each time the button is pressed, the mode will change in the following order:
| sAUTO | sCOOL |
|
| s DRY |
|
|
|
|
|
|
| |||
| HEAT t | FANt |
| ||||
|
| ||||||
About three seconds later, the entire display will reappear. | Example: When set to COOL. |
|
To Set the Thermostat
Press the SET TEMP. buttons (Fig. 5 F).
5 button: Press to raise the thermostat setting.
∞button: Press to lower the thermostat setting.
●Thermostat setting range:
AUTO | 64 to 88 °F |
|
Heating | 60 to 88 °F |
|
Cooling/Dry | 64 to 88 °F |
|
The thermostat cannot be used to set room temperature during the FAN mode (the |
| |
temperature will not appear on the remote control unit’s display). |
| |
About three seconds later, the entire display will reappear. |
| |
The thermostat setting should be considered a standard value, and may differ | Example: When set to 86 °F. | |
somewhat from the actual room temperature. |
| |
To Set the Fan Speed
Press the FAN CONTROL button (Fig. 5 I).
Each time the button is pressed, the fan speed changes in the following order:
sAUTO | sHIGH | s MED | sLOW | sQUIET |
About three seconds later, the entire display will reappear.
When set to AUTO: | |
Heating | : Fan operates so as to optimally circulate warmed air. |
| However, the fan will operate at very low speed when the temperature |
| of the air issued from the indoor unit is low. |
Cooling | : As the room temperature approaches that of the thermostat setting, |
| the fan speed becomes slower. |
Fan | : The fan runs at the low fan speed. |
The fan will operate at a very low setting during Monitor operation | Example: When set to AUTO. | |
and at the start of the Heating mode. | ||
|
When set to QUIET:
SUPER QUIET operation begins. The indoor unit’s airflow will be reduced for qui- eter operation.
●SUPER QUIET operation cannot be used during Dry mode. (The same is true when dry mode is selected during AUTO mode operation.)
●Heating and Cooling performance will be reduced somewhat during SUPER QUIET operation.
To Stop Operation
Press the START/STOP button (Fig.5 J).
The OPERATION indicator lamp (red) (Fig. 3 5) will go out.
