Operating Instructions Safety Instructions

About the controls with

temperature settings. (for other models, see next page)

NOTE: The refrigerator is shipped with protective film covering the temperature controls.

If this film was not removed during installation, remove it now.

The temperature controls are preset in the factory at 37°F for the refrigerator compartment and 0°F for the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings.

The temperature controls can display both the SET temperature as well as the actual temperature in the refrigerator and freezer. The actual temperature may vary slightly from the SET temperature based on usage and operating environment.

Setting either or both controls to OFF stops cooling in both the freezer and refrigerator compartments, but does not shut off electrical power to the refrigerator.

Troubleshooting Tips Installation Instructions

Changing the Temperature

To change the temperature, press and release the WARMER or COLDER pad. The SET light will come on and the display will show the set temperature. To change the temperature, tap either the WARMER or COLDER pad until the desired temperature is displayed. Refrigerator temperatures can be adjusted between 34°F and 47°F and the freezer temperatures can be adjusted between –6°F and +8°F.

Once the desired temperature has been set, the temperature display will return to the actual refrigerator and freezer temperatures after 5 seconds. Several adjustments may be required.

Each time you adjust controls, allow 24 hours for the refrigerator to reach the temperature you have set.

To turn the cooling system off, tap the WARMER pad for either the refrigerator or the freezer until the display shows OFF. To turn the unit back on, press the COLDER pad for either the refrigerator or freezer. The SET light will illuminate on the side you selected. Then press the COLDER pad again (on the side where the SET light is illuminated) and it will go to the preset points of 0°F for the freezer and 37°F for the refrigerator. Setting either or both controls to OFF stops cooling in both the freezer and refrigerator compartments, but does not shut off electrical power to the refrigerator.

Consumer Support

Performance Air Flow System

The Performance Air Flow System is designed to

wall of the refrigerator and the Air Tunnel on the

maximize temperature control in the refrigerator

bottom portion of the freezer rear wall. Placing

and freezer compartments. This unique special

food in front of the louvers on these components

feature consists of the Air Tower along the back

will not affect performance.

4

Page 4
Image 4
GE GDL22KCWSS manual About the controls with, Consumer Support, Changing the Temperature, Performance Air Flow System

GDL22KCWSS specifications

The GE GDL22KCWSS is a standout refrigerator that brings modern features and reliable performance to your kitchen. Designed with the user in mind, this model offers an impressive blend of functionality, aesthetics, and energy efficiency.

One of the main features of the GE GDL22KCWSS is its spacious storage capacity. With a total of 21.9 cubic feet, this refrigerator provides ample space for all your food and beverage needs. The internal layout is designed for easy organization, with adjustable shelves and gallon door bins, allowing users to customize their storage according to their preferences. The crispers are specially designed to maintain optimal humidity levels, keeping fruits and vegetables fresh for longer durations.

In terms of technology, the GE GDL22KCWSS utilizes advanced cooling systems that ensure consistent temperatures throughout the refrigerator. The climate control system employs advanced temperature management technology to retain freshness while preventing temperature fluctuations that can spoil food. Additionally, the appliance features a Turbo Cool setting, which provides an extra boost of cooling after opening the door, quickly restoring optimal temperatures.

For convenience, this model comes equipped with ice and water dispensers, providing chilled water and fresh ice right at your fingertips. The filtration system not only ensures the water is clean and delicious but also reduces impurities and contaminants, making it ideal for daily consumption.

The design of the GE GDL22KCWSS is another highlight, featuring a sleek stainless steel finish that complements any kitchen decor. The fingerprint-resistant coating keeps the exterior looking pristine, even in high-traffic areas. The internal LED lighting is not only energy-efficient but also illuminates the refrigerator's interior, making it easier to find items, even in low light.

Energy efficiency is a key characteristic of the GE GDL22KCWSS, as it is designed to meet rigorous energy standards. This not only helps in reducing utility bills but also contributes to a more sustainable household. The appliance is compliant with ENERGY STAR® efficiency guidelines, providing assurance that it operates using less energy, reducing its environmental impact.

In summary, the GE GDL22KCWSS is a well-designed refrigerator that excels in storage capacity, innovative cooling technology, and modern conveniences. Its array of features makes it a practical addition to any home, ensuring that your food stays fresh while enhancing the overall functionality of your kitchen. Whether you are an avid cook or simply looking for a reliable appliance, the GE GDL22KCWSS stands out as a compelling choice in the appliance market.