Installation Instructions
REMOVING THE FREEZER DRAWER (on some models)
The freezer drawer can be removed, if needed, to fit through tight areas.
Read these instructions completely and carefully.
1REMOVE THE BASKET
AOpen the freezer drawer until it stops.
BThe freezer basket rests on a frame inside the freezer drawer. Lift the basket up at the back.
CLift the front up and lift the entire basket up and out of the drawer.
A
2REMOVE THE DRAWER FRONT FROM THE SLIDES
ARemove the Phillips head screw on each side of the railing.
DO NOT remove the hex head screws from the rail assemblies.
DO NOT remove hex head screws
Phillips Screw 
DO NOT remove hex head screws
2REMOVE THE DRAWER FRONT FROM THE SLIDES (cont.)
BLift up on both sides of the freezer drawer handle to separate the drawer railings from the rail assemblies.
CSet the drawer front on a non- scratching surface.
DPush the rail assemblies back into locking position.
Rail
Assembly Drawer
Assembly
3REMOVE THE BASE GRILLE
(if needed)
If, after removing the freezer drawer and refrigerator door, the refrigerator will still not fit through a doorway, the base grille can be removed.
ARemove the base grille by grasping it at the bottom and pulling it straight out.
22
