GE GDL22KCWSS manual Remove The Center Hinge Pin, Remove The Freezer Door, Remove Center Hinge

Installation Instructions

2REMOVE THE CENTER HINGE PIN

AOn models with a freezer door, tape the door shut with masking tape.

BUsing an adjustable wrench, remove the center hinge pin.

3REMOVE THE FREEZER DOOR

(freezer door models)

ARemove the tape and tilt the door away from the cabinet. Lift the door off the bottom hinge pin.

NOTE: There is a plastic washer between the hinge and the top of the freezer door. Do not lose.

BSet the door on a non-scratching surface with the inside up.

4REMOVE CENTER HINGE

Using a 3/8″ or 10 mm socket ratchet/driver and Phillips head screwdriver, remove the bolts and screws securing the center hinge to the cabinet. Set hinge, bolts, screws, washer (on freezer door models) and hinge pin aside.

On models with a freezer drawer, skip to Step 7.

5TRANSFER BOTTOM HINGE BRACKET (freezer door models)

ARemove the base grille by grasping it at the bottom and pulling it straight out.

BUsing a 3/8″ or 10 mm socket ratchet/driver, remove the screws securing the bottom hinge bracket to the cabinet.

CUsing an adjustable wrench, remove the hinge pin and washer(s) from the right side of the bracket and install on the left.

Washer(s)

25