Electrolux 65050 VI manual Leak prevention system, Electrical Connection, Changing a fuse

Page 44

Installation and Connection Instructions

 

Leak prevention system

 

To avoid damage caused by water leakage, the dishwasher is equipped

 

with a leak prevention system.

 

In the event of a fault, the safety valve in the appliance immediately

 

interrupts the inflow of water and the drain pump is activated. In this

 

way water can neither escape nor overflow. Any remaining water in the

 

appliance is automatically pumped out.

1

The leak prevention system also works when the appliance is switched

 

off – the appliance must however not be disconnected from the mains.

In the event of a fault when the appliance is switched on, a buzzing tone can also be heard.

Electrical Connection

 

Any electrical work required to install this appliance should be car-

 

ried out by a qualified electrician or competent person.

1

WARNING - This appliance must be earthed.

 

The manufacturer declines any responsibility should these safety

measures not be observed.

Before switching on make sure the electricity supply voltage is the same as that indicated on the appliance rating plate.

To isolate the dishwasher from the mains, remove the mains plug. Important: The plug must still be accessible after the appliance has been installed.

Changing a fuse

The appliance is supplied with a 13amp plug fitted. In the event of hav- ing to change the fuse in the plug supplied, a 13amp ASTA approved (BS 1363A) fuse must be used.

Should the plug need to be replaced for any reason, proceed as described below.

The wires on the mains lead are coloured in accordance with the following code.

Green

& Yellow

BlueBrown

Green and Yellow : Earth

Blue

: Neutral

Brown

: Live

Cord Clamp

44

Image 44
Contents Favorit 65050 Tips on using the appliance Dear customerPlease read these user instructions carefully Pass them on to any subsequent owner of the applianceContents Installation and Connection Instructions Safety Instructions Installation, Connection and Placing into OperationChild Safety General SafetyCorrect Use Disposal Economical and Ecological DishwashingDisposing of the Packaging Material Disposal of Old AppliancesPanel Function button Display and control panelMulti-display can indicate Prior to using for the first time Water softenerHardness range of the water in your area PanelSetting electronically Setting the water softenerSetting manually Water can be softened in one of two ways Special salt for the water softenerUse special salt or salt substitute Adding special salt VatedRinse aid can be added in one of two ways Rinse aidActivating/deactivating the inflow of rinse aid Fully open the rinse aid compartment lid Adding rinse aidPress function button Adjusting Rinse Aid Dosing Activating/deactivating the acoustic signal Daily Use Loading Cutlery and DishesNot be washed in the dishwasher For washing in the dishwasher the following cutlery/dishesLoading Cutlery Or work surface On some models of dishwasherLoading Pans, Frying Pans Large Plates Folded over to the leftTo ease the loading of large items Two right-hand plate insertsFolded across one another Across one anotherTwo rear plate inserts in the lower Baskets can be folded across one anotherLoading Cups, Glasses Coffee Services Raising the Upper Basket Adjusting the Height of the Upper BasketLowering the Upper Basket Filling with Detergent Fill with detergentUse of 3 in 1/ Combi Detergent Tablets General AdviceSpecial Advice Automatic Wash Programmes Concentrated DetergentDetergent tablets Selecting the programme Programme Table Changing a programme Starting a programmeChanging/interrupting/aborting a programme Setting or changing the start delay Aborting the programme ResetSwitch off the dishwasher by pressing the ON/OFF button Setting the start delayChanging the start delay Cancelling the start delayChanging the programme after the start delay has been set Load Sensing Sensor LogicRemoving the dishes Care and CleaningSwitching off the dishwasher Cleaning the Filter StancesError messages are displayed What to do, ifActivated Malfunction Possible cause RemedyMenced programme. The programme will continue CentreMalfunction Possible cause Remedy Two short continuously Repeated warning tonesThere are problems with the operation of the dish- washer Wash results are not satisfactoryDishes are still dirty Dishes are wet and dullThere are dried water drops on the glasses and dishes Technical DataLower rinse aid dosing Sample loading arrangements Upper basket Lower basket with cutlery basketInstallation and Connection Instructions Installing the DishwasherFitting the Furniture Door Panel See installation template suppliedFollowing dimensions Connecting the Dishwasher Water ConnectionPermitted water pressure Connect the inlet hoseWater inlet hose with safety valve Please take care when installing the water inlet hoseWater drain Changing a fuse Leak prevention systemElectrical Connection Connections Exclusions Standard guarantee conditionsEuropean Guarantee Calls may be recorded for training purposes 08705 929Customer Care AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

65050 VI specifications

The Electrolux 65050 VI is a remarkable addition to the world of home appliances, designed specifically for modern kitchens that demand performance without compromising on style. This built-in vacuum cleaner showcases a seamless blend of innovative technology and user-friendly features, making it an essential tool for effective home management.

At the heart of the Electrolux 65050 VI is its powerful motor, which delivers effective suction capabilities while maintaining energy efficiency. This model operates quietly, allowing users to clean without disturbing the peace of their living space. The design prioritizes ergonomics, making it easy to handle during cleaning tasks while ensuring optimal maneuverability around furniture and tight corners.

One of the standout features of the Electrolux 65050 VI is its versatility. Equipped with a range of specialized attachments, this vacuum cleaner can tackle a variety of surfaces, from carpets to hard floors. The adjustable suction settings allow users to customize the power based on the type of flooring being cleaned, ensuring thorough dirt and debris removal without damaging sensitive surfaces.

In addition to its performance, the Electrolux 65050 VI integrates advanced filtration technology. The high-efficiency particulate air (HEPA) filter captures allergens and fine dust particles, contributing to a healthier home environment. This is especially beneficial for allergy sufferers, as it minimizes the circulation of harmful particles in the air.

Ease of use is another highlight of this built-in vacuum model. The bagless design means that users no longer have to worry about purchasing replacement bags, making maintenance simple and cost-effective. The dust container is easy to empty, promoting a hassle-free experience post-cleaning.

Furthermore, the Electrolux 65050 VI is designed for aesthetic appeal, blending seamlessly with contemporary kitchen interiors. Its sleek design is complemented by a range of color options, allowing homeowners to choose a model that aligns with their personal style.

In summary, the Electrolux 65050 VI is a well-rounded built-in vacuum cleaner that excels in performance, user convenience, and design. With its powerful motor, versatile attachments, advanced filtration system, and modern aesthetic, this model is positioned as a valuable asset for anyone looking to maintain a clean and healthy home environment effortlessly.