Electrolux 65050 VI manual Connecting the Dishwasher, Water Connection, Permitted water pressure

Page 41

Installation and Connection Instructions

Connecting the Dishwasher

Water Connection

The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations.

The dishwasher must be connected to a cold water supply.

The dishwasher must not be connected to open hot water appliances or instantaneous water heaters.

Permitted water pressure

Lowest permitted water pressure:

Consult your installer if the water pres-

1 bar (=10 N/cm2 =100 kPa)

sure is less than 1 bar.

Highest permitted water pressure:

In the case of a water pressure greater

10 bar (=100 N/cm2 =1 MPa)

than 10 bar, a pressure reduction valve

 

must be used (available from your

 

dealer).

 

 

 

Connect the inlet hose

1

The water inlet hose must not be kinked, crushed or entangled when it

 

is being connected up.

0Connect the threaded hose fitting (ISO 228-1:2000) on the water inlet hose to a tap with an external thread (¾ inch). Tighten the threaded hose fitting hand tight only.

3

• In order that access to the tap in the kitchen is not limited by the use

 

of the dishwasher, we recommend the installation of an additional

tap, or fitting a two way adapter to the existing tap.

• If you need a longer water inlet hose than that supplied, VDE approved complete hose sets are to be used. These are available from your local Service Force Centre.

• Do not use, for connection, old hoses which have been used for another appliance.

41

Image 41
Contents Favorit 65050 Dear customer Tips on using the appliancePlease read these user instructions carefully Pass them on to any subsequent owner of the applianceContents Installation and Connection Instructions Installation, Connection and Placing into Operation Safety InstructionsChild Safety General SafetyCorrect Use Economical and Ecological Dishwashing DisposalDisposing of the Packaging Material Disposal of Old AppliancesPanel Function button Display and control panelMulti-display can indicate Water softener Prior to using for the first timeHardness range of the water in your area PanelSetting electronically Setting the water softenerSetting manually Water can be softened in one of two ways Special salt for the water softenerUse special salt or salt substitute Vated Adding special saltRinse aid can be added in one of two ways Rinse aidActivating/deactivating the inflow of rinse aid Fully open the rinse aid compartment lid Adding rinse aidPress function button Adjusting Rinse Aid Dosing Activating/deactivating the acoustic signal Loading Cutlery and Dishes Daily UseNot be washed in the dishwasher For washing in the dishwasher the following cutlery/dishesLoading Cutlery On some models of dishwasher Or work surfaceFolded over to the left Loading Pans, Frying Pans Large PlatesTo ease the loading of large items Two right-hand plate insertsAcross one another Folded across one anotherTwo rear plate inserts in the lower Baskets can be folded across one anotherLoading Cups, Glasses Coffee Services Raising the Upper Basket Adjusting the Height of the Upper BasketLowering the Upper Basket Fill with detergent Filling with DetergentUse of 3 in 1/ Combi Detergent Tablets General AdviceSpecial Advice Automatic Wash Programmes Concentrated DetergentDetergent tablets Selecting the programme Programme Table Changing a programme Starting a programmeChanging/interrupting/aborting a programme Aborting the programme Reset Setting or changing the start delaySwitch off the dishwasher by pressing the ON/OFF button Setting the start delayCancelling the start delay Changing the start delayChanging the programme after the start delay has been set Load Sensing Sensor LogicRemoving the dishes Care and CleaningSwitching off the dishwasher Stances Cleaning the FilterWhat to do, if Error messages are displayedActivated Malfunction Possible cause RemedyCentre Menced programme. The programme will continueMalfunction Possible cause Remedy Two short continuously Repeated warning tonesWash results are not satisfactory There are problems with the operation of the dish- washerDishes are still dirty Dishes are wet and dullThere are dried water drops on the glasses and dishes Technical DataLower rinse aid dosing Upper basket Lower basket with cutlery basket Sample loading arrangementsInstalling the Dishwasher Installation and Connection InstructionsFitting the Furniture Door Panel See installation template suppliedFollowing dimensions Water Connection Connecting the DishwasherPermitted water pressure Connect the inlet hosePlease take care when installing the water inlet hose Water inlet hose with safety valveWater drain Changing a fuse Leak prevention systemElectrical Connection Connections Exclusions Standard guarantee conditionsEuropean Guarantee Calls may be recorded for training purposes 08705 929Customer Care AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

65050 VI specifications

The Electrolux 65050 VI is a remarkable addition to the world of home appliances, designed specifically for modern kitchens that demand performance without compromising on style. This built-in vacuum cleaner showcases a seamless blend of innovative technology and user-friendly features, making it an essential tool for effective home management.

At the heart of the Electrolux 65050 VI is its powerful motor, which delivers effective suction capabilities while maintaining energy efficiency. This model operates quietly, allowing users to clean without disturbing the peace of their living space. The design prioritizes ergonomics, making it easy to handle during cleaning tasks while ensuring optimal maneuverability around furniture and tight corners.

One of the standout features of the Electrolux 65050 VI is its versatility. Equipped with a range of specialized attachments, this vacuum cleaner can tackle a variety of surfaces, from carpets to hard floors. The adjustable suction settings allow users to customize the power based on the type of flooring being cleaned, ensuring thorough dirt and debris removal without damaging sensitive surfaces.

In addition to its performance, the Electrolux 65050 VI integrates advanced filtration technology. The high-efficiency particulate air (HEPA) filter captures allergens and fine dust particles, contributing to a healthier home environment. This is especially beneficial for allergy sufferers, as it minimizes the circulation of harmful particles in the air.

Ease of use is another highlight of this built-in vacuum model. The bagless design means that users no longer have to worry about purchasing replacement bags, making maintenance simple and cost-effective. The dust container is easy to empty, promoting a hassle-free experience post-cleaning.

Furthermore, the Electrolux 65050 VI is designed for aesthetic appeal, blending seamlessly with contemporary kitchen interiors. Its sleek design is complemented by a range of color options, allowing homeowners to choose a model that aligns with their personal style.

In summary, the Electrolux 65050 VI is a well-rounded built-in vacuum cleaner that excels in performance, user convenience, and design. With its powerful motor, versatile attachments, advanced filtration system, and modern aesthetic, this model is positioned as a valuable asset for anyone looking to maintain a clean and healthy home environment effortlessly.