NETGEAR manual Reference Manual for the Adsl Modem Wireless Router DG834G

Reference Manual for the ADSL Modem Wireless Router DG834G

2.From the Wireless Settings menu, Wireless Station Access List section, click the Setup Access List button to display the list, shown below:

Figure 3-4

3.Select the Turn Access Control On check box to enable restricting wireless computers by their MAC addresses.

4.If the wireless station is currently connected to the network, you can select it from the Available Wireless Stations list. Click Add to add the station to the Trusted Wireless Stations list.

5.If the wireless station is not currently connected, you can enter its address manually. Enter the MAC address of the authorized computer. The MAC address is usually printed on the wireless card, or it may appear in the modem router’s DHCP table. The MAC address will be 12 hexadecimal digits.

Click Add to add your entry. You can add several stations to the list, but the entries will be discarded if you do not click Apply.

Wireless Configuration 3-9

v1.0, October 2006