Electrolux RM 122F installation instructions GAS Connection

Page 10

grease, etc. removed from the area of contact and it should be located in a position protected from the weather, such as inside the boot.

A 15 amp, continuous rating, fuse must be incorporated in the supply to the refrigerator, as near to the battery as possible. A geed quality fuse holder should be used having adequate size well-made contacts which will carry the current lead without undue resistance.

When operating en 12 volts the refrigerator has a relatively high current consumption (7 amps) and it is only intended to be used by this method of operation whilst the engine is running and charging the battery otherwise the battery may become discharged to a point where it will not re-start the car engine. 12 volt operation is net thermostatically controlled and the 75 watt heater is 'en' all the time the refrigerator is connected to the 12V supply and any switches in the line are "on'.

Note: to minimise the possibility of a drained battery due to the refrigerator being inadvertently left operating when the engine is at rest, it is strongly recommended that a suitable relay device is fitted in the car, in circuit with the ignition switch, se that when the engine is switched off, the refrigerator is automatically switched off - see Fig. 12b.

11. GAS CONNECTION

The gas installation should only be carried out by a person experienced in gas fitting.

It is recommended that the gas pipe feeding {he refrigerator is run underneath the caravan and is so arranged that it is possible to turn off the supply to all appliances ether than the refrigerator when they are net required. The supply pipe should preferably be of copper; if any ether material is used, it must of a type approved for use with continuously operating bottled gas appliances and have threaded connections throughout. Push on connections must not be used. (We do not recommend the use of "rubber" type flexible tubing for connecting permanently operating appliances of this type in the United Kingdom).

All connectors, etc. should be of a type specifically designed for the connection pipe used. Screwed joints should be sealed with a jointing compound approved for use with bottled gas.

The gas supply pipe should be connected to the 1/8” B.S.P female inlet adaptor (located underneath the refrigerator) by means of a suitable threaded coupling - See note below. The Inlet adaptor will accept 1/8” B.S.P male thread. (Access to the inlet adaptor may be obtained by pulling off the knob of the gas control valve then removing the lower ventilator by taking out the screws at the ends)

Depending on the location of the gas supply pipe, it may be necessary to connect a piece of copper pipe to the inlet adaptor on the refrigerator before placing the refrigerator in the recess. The pipe should be of suitable length and pre-shaped so that when the refrigerator is in place, then end of the pipe will be in a convenient and accessible position for the connection to the main gas supply or to another piece of pipe coming from the main gas pipe.

In making the connection to the refrigerator, it is recommended that a union gas cock of an approved type for bottled gas is incorporated in the supply line in a position which is readily accessible to the user. For eventual servicing purposes, the union should be on the outlet side of the cock and the pipework should be positioned so that as not to prevent the refrigerator from being readily withdrawn.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model RM 122F Important User Information Instructions for Installation Changing Outer Door Panel Dimensions of RefrigeratorChanging Door Hinges to Opposite Side BUILDING-INVent Hole Under Refrigerator Fitting the Upper VentilatorAdditional Ventilator Flue ArrangementFlue Venting Kit Page Electrical Installation Wiring for Electronic Igniter where fittedMains Voltage Connection GAS Connection Introduction LevellingStarting the Refrigerator see fig GAS PressureLighting the Burner Electric Operation 230V a.c. Model RM123 only Emergency Lighting Procedure for Gas BurnerLighting the Burner Models with Electronic Igniter To start the refrigerator on mains voltage electricityICE-MAKING Temperature RegulationStoring Food in the Refrigerator Travel CatchDefrosting CleaningWhen not in USE ConsumptionIf the refrigerator is not cold enough it may be because MaintenanceService and Spare Parts Make Sure That

RM 122F specifications

The Electrolux RM 122F is a versatile and efficient absorption refrigerator designed for a variety of applications, particularly in the leisure and camping sector. This model exemplifies Electrolux's commitment to quality and innovation, offering users a reliable cooling solution for their mobile lifestyles.

One of the standout features of the RM 122F is its three-way power system. It can operate on gas, 12V battery, or 230V mains electricity, making it incredibly adaptable for different situations, whether you are on the road in a caravan, enjoying a camping trip, or parked at a holiday home. This flexibility ensures that users always have access to refrigeration, regardless of their power source.

The refrigerator boasts a spacious interior with a total storage capacity of approximately 140 liters, providing ample room for food and beverages. It is designed to keep your groceries organized, featuring various shelves and compartments that cater to different storage needs. The adjustable shelves allow for customization based on the items stored, enhancing usability for users with diverse needs.

Another important feature of the RM 122F is its advanced cooling technology. Utilizing absorption refrigeration, this model is not only quiet but also produces minimal vibrations, making it ideal for use in confined spaces such as a camping vehicle. The temperature control allows users to set the desired cooling level, ensuring optimal preservation of food items.

In terms of design, the Electrolux RM 122F sports a sleek and modern aesthetic that complements any camper or caravan interior. The user-friendly control panel is intuitive, allowing for easy operation and configuration without unnecessary hassle.

Furthermore, energy efficiency is a key characteristic of the RM 122F, which adheres to stringent environmental standards. The appliance is engineered to minimize energy consumption while maximizing cooling performance, ensuring that users can enjoy their off-the-grid adventures without the fear of draining their power supply.

Overall, the Electrolux RM 122F represents an ideal choice for those seeking a reliable and efficient cooling solution tailored for mobile living. With its robust features, flexible power options, and thoughtful design, this absorption refrigerator stands out as a dependable companion for any adventure or leisure activity.
Top Page Image Contents