Electrolux RM 122F Changing Door Hinges to Opposite Side, Changing Outer Door Panel, Building-In

Page 4

Arrows indicate air-flow to ventilate cooling unit at rear

FIG. 1

4.CHANGING DOOR HINGES TO OPPOSITE SIDE

The refrigerator is manufactured with the door hinged on the right hand side; however, it can be changed to left hand opening if required.

Gently place the refrigerator on its back (taking care not to damage the burner assembly), pull off the pas control knob, then remove the lower ventilator-by taking out the screws from each end.

Remove upper hinge blade and travel catch blade, from top of cabinet. Fit the upper hinge blade and travel catch blade to their new positions on the top of the cabinet and transfer the lower hinge blade to the opposite side. Refit the ventilator by means of the screws, then push the gas control knob onto its spindle so that the flat on the spindle engages the flat in the recess of the knob.

5.CHANGING OUTER DOOR PANEL

If required, the outer door panel can be removed and replaced by one of a different material or colour to match other fitments. It can be of rust proof metal or plastic laminate.

To do this lay the refrigerator on Its back, and remove the bottom section of the door frame held by 3 screws. The existing panel can then be slid out and a new panel slid in and the bottom section refitted to ruin the new panel.

The replacement panel should be from 0.5 mm to 3 mm thick, and 350 mm wide x 485 mm high.

6.DIMENSIONS OF REFRIGERATOR

The exterior dimensions of the refrigerator are given In fig. 3. For dimensions of the recess to house the refrigerator when building-in, refer to item 7.

7.BUILDING-IN

While the refrigerator is built-in, adequate space must be left under, over and behind it to allow a sufficient circulation of air over the cooling unit at the back for satisfactory operation. The recommended method of building-in is shown in fig. 5 with the upper ventilator at the front. However, where space limitations do not permit the upper ventilator to be fitted at the front; the alternative arrangement shown in fig. 6 may be adopted and the height of the recess reduced accordingly. A work-surface can then be fitted over the top front of the refrigerator, but it must not over-hang the door where it could interfere with the operation of the travel catch.

Securing in the Recess

The refrigerator must be secured in the recess to prevent movement. A suggested method of securing is by means of metal brackets about 20mm (W) wide, (which should be made to suit the particular installation), screwed to the rear of the refrigerator by means of the two existing cooling unit fixing screws (fig. 2) and to the rear wall of the caravan.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Model RM 122F Important User Information Instructions for Installation Dimensions of Refrigerator Changing Door Hinges to Opposite SideChanging Outer Door Panel BUILDING-INFitting the Upper Ventilator Additional VentilatorVent Hole Under Refrigerator Flue ArrangementFlue Venting Kit Page Electrical Installation Wiring for Electronic Igniter where fittedMains Voltage Connection GAS Connection Introduction LevellingStarting the Refrigerator see fig GAS PressureLighting the Burner Emergency Lighting Procedure for Gas Burner Lighting the Burner Models with Electronic IgniterElectric Operation 230V a.c. Model RM123 only To start the refrigerator on mains voltage electricityTemperature Regulation Storing Food in the RefrigeratorICE-MAKING Travel CatchCleaning When not in USEDefrosting ConsumptionMaintenance Service and Spare PartsIf the refrigerator is not cold enough it may be because Make Sure That

RM 122F specifications

The Electrolux RM 122F is a versatile and efficient absorption refrigerator designed for a variety of applications, particularly in the leisure and camping sector. This model exemplifies Electrolux's commitment to quality and innovation, offering users a reliable cooling solution for their mobile lifestyles.

One of the standout features of the RM 122F is its three-way power system. It can operate on gas, 12V battery, or 230V mains electricity, making it incredibly adaptable for different situations, whether you are on the road in a caravan, enjoying a camping trip, or parked at a holiday home. This flexibility ensures that users always have access to refrigeration, regardless of their power source.

The refrigerator boasts a spacious interior with a total storage capacity of approximately 140 liters, providing ample room for food and beverages. It is designed to keep your groceries organized, featuring various shelves and compartments that cater to different storage needs. The adjustable shelves allow for customization based on the items stored, enhancing usability for users with diverse needs.

Another important feature of the RM 122F is its advanced cooling technology. Utilizing absorption refrigeration, this model is not only quiet but also produces minimal vibrations, making it ideal for use in confined spaces such as a camping vehicle. The temperature control allows users to set the desired cooling level, ensuring optimal preservation of food items.

In terms of design, the Electrolux RM 122F sports a sleek and modern aesthetic that complements any camper or caravan interior. The user-friendly control panel is intuitive, allowing for easy operation and configuration without unnecessary hassle.

Furthermore, energy efficiency is a key characteristic of the RM 122F, which adheres to stringent environmental standards. The appliance is engineered to minimize energy consumption while maximizing cooling performance, ensuring that users can enjoy their off-the-grid adventures without the fear of draining their power supply.

Overall, the Electrolux RM 122F represents an ideal choice for those seeking a reliable and efficient cooling solution tailored for mobile living. With its robust features, flexible power options, and thoughtful design, this absorption refrigerator stands out as a dependable companion for any adventure or leisure activity.
Top Page Image Contents