Electrolux RJPK1824 user manual Levelling, Location, Door reversibility

Page 10

Levelling

When placing the appli- ance ensure that it stands level. This can be achieved by two adjusta- ble feet at the bottom in front.

Location

The appliance should be installed well away from sour- ces of heat such as radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around the back

Warning!

of the cabinet. To ensure best performance, if the appli- ance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit must be at least 100 mm . Ideally, howev- er, the appliance should not be positioned below over- hanging wall units. Accurate levelling is ensured by one or more adjustable feet at the base of the cabinet.

min.100 mm

15 mm

15 mm

If the cabinet is placed in a corner and the side with the hinges facing the wall, the distance between the wall and the cabinet must be at least 10 mm to allow the door to open enough so that the shelves can be re- moved.

It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.

Door reversibility

Important! To carry out the following operations, we suggest that this be made with another person that will keep a firm hold on the doors of the appliance during the operations.

To change the opening direction of the door, do these steps:

10

Image 10
Contents Fridge Freezer Contents Safety informationService Care and cleaningInstallation Daily UseFirst use OperationDaily use Helpful hints and tips Hints for storage of frozen food Care and cleaningPeriodic cleaning Defrosting of the refrigeratorDefrosting the freezer What to do if…Periods of non-operation Problem Possible cause Solution Replacing the lampClosing the door Technical dataInstallation PositioningLocation LevellingDoor reversibility If foreseen Environmental concerns Electrical connectionPage Page Page 200384273-00-25022011