16Installation
1.Apply the adhesive sealing strip to the appliance as shown in figure.
2.Install the appliance in the niche.
Push the appliance in the direction of the arrow (1) until the upper gap cover stops against the kitchen furniture.
Push the appliance in the direction of the arrow (2) against the cupboard on the opposite side of the hinge.
3.Adjust the appliance in the niche.
Make sure that the distance between the appliance and the cupboard front- edge is 44 mm.
The lower hinge cover (in the accesso- ries bag) makes sure that the distance between the appliance and the kitchen furniture is correct.
Make sure that the clearance between the appliance and the cupboard is 4 mm.
Open the door. Put the lower hinge cov- er in position.
4mm |
44mm |