Electrolux SANTO K 78800 installation instructions Instructions for building-in the appliance

Page 9

Instructions for building-in the appliance

2.Push the appliance into the housing until stop strip (A) touches the kitchen unit.

3.Open the door and push the appliance against the side of kitchen furniture oppo- site to that of appliance hinges.

4.Fasten the appliance with 4 screws provided in the kit included with the appliance.

5.Snap vent grille (C) and hinge cover (D) into position.

6.Apply blanking covers (B) as indicated.

A

D

C

B

7.Separate parts A, B, C, D as shown in the figure.

A B

C

D

9

Image 9

Contents Santo K 78800 Dear customer Contents Safety of children Important Safety InstructionsPrior to initial start-up RefrigerantCase of malfunction Daily Operation Remove transport packaging Disposal Appliance Packaging Information Disposal of old AppliancesInstallation Installation LocationIntegratable models i-appliances Instructions for building-in the appliance Dimensions of the recessReversing the door Building-inInstructions for building-in the appliance 50mm Electrical Connection View of the appliance Description of the applianceSetting 0 means Off Starting up and temperature regulationSetting 1 means Prior to Initial Start-UpSwitching off the appliance Interior AccessoriesStorage shelves Defrosting Correct storageVariable Inner Door Fridge defrosts automaticallyCleaning and Care Energy Saving Tips What to do ifCorrecting Malfunctions Turn the thermostat knob to a colder setting tem- porarily Symptom Possible Cause RemedyNoises during Operation Changing the light bulbClicks HummingRegulations, Standards, Guidelines Refrigerant Circuit Technical terminologyEvaporator CompressorPage Page AEG Hausgeräte GmbH Postfach 90327 Nürnberg Electrolux plc