Samsung CLX-8380 manual Multi-purpose tray, Tips on using the multi-purpose tray, Envelope

In the multi-purpose tray

The multi-purpose tray can hold special sizes and types of print material, such as transparencies, postcards, note cards, and envelopes. It is useful for single page printing on letterhead or colored paper.

Tips on using the multi-purpose tray

•Load only one size of print media at a time in the multi-purpose tray.

•To prevent paper jams, do not add paper when there is still paper in the multi-purpose tray. This also applies to other types of print media.

•Print media should be loaded face down with the top edge going into the multi-purpose tray first and be placed in the center of the tray.

•Always load only the specified print media to avoid paper jams and print quality problems. (Page 4.2)

•Flatten any curl on postcards, envelopes, and labels before loading them into the multi-purpose tray.

To load paper in the multi-purpose tray:

1Open the multi-purpose tray and unfold the multi-purpose tray extension, as shown.

2If you are using paper, flex or fan the edge of the paper stack to separate the pages before loading.

For transparencies, hold them by the edges and avoid touching the print side. Oils from your fingers can cause print quality problems.

3Load the paper with the side to be printed on facing down.

Note

Place the side to be printed facing down.

Envelope	Preprinted paper	Transparency
Punched paper	Card stock	Letterhead paper
Label	Banner paper

Make sure you load one sheet at a time, and hold the paper with two hands for the paper not to fall since the paper length is longer than the multi-tray length.

4.8 <Loading originals and print media>