4Push the lock lever up and pull the waste toner container out.
Note
When you pull out the waste toner container out of the machine, move the container carefully not to drop it from your hands.
Make sure that you lay the waste toner container on a flat surface so that the toner does not spill.
5Remove the container’s cap from the container as shown below, and use it to close the waste toner container openings.
Caution
Do not tilt or turn over the container.
6Take a new waste toner container out of its package.
7Insert the new container into position and then push it to make sure that it is firmly seated in place.
8Close the front cover, then the side cover.
9Make sure that the cover is securely latched and then turn the machine on.
Caution
If the cover is not completely closed, the machine will not operate.
Maintenance Parts
To avoid print quality and paper feed problems resulting from worn parts and to maintain your machine in top working condition the following items will need to be replaced after the specified number of pages or when the life span of each item has expired.
Items | Part Name | Yield (Average) |
|
|
|
Transfer belt unit | Approx. | |
|
| 100,000 images |
|
|
|
Transfer roller | MEA | Approx. 100,000 |
(T2) |
| pages |
|
|
|
Fuser unit | ELA unit fuser | Approx. 100,000 |
|
| pages |
|
|
|
DADF rubber pad | Approx. 50,000 | |
|
| pages |
|
|
|
DADF feed roller | Approx. 200,000 | |
|
| pages |
|
|
|
MEA | Approx. 50,000 | |
rubber pad |
| pages |
|
|
|
Guide exit duplex | MEA unit_exit duplex | Approx. 100,000 |
|
| pages |
|
|
|
Paper feed roller | MEA | Approx. 100,000 |
|
| pages |
|
|
|
Pickup roller | ELA | Approx. 100,000 |
|
| pages |
|
|
|
We highly recommend that this maintenance be performed by an authorized service provider, dealer or the retailer where you bought the machine. The warranty does not cover the replacement of the maintenance parts after their lifespan.
