Copying originals
This is the normal and usual procedure for copying your originals.
1Press Copy from the Main screen.
2Place originals, face up, in the DADF, or you can use the scanner glass with a single original document face down.
3Adjust the settings for each copy such as Original Size, Reduce/ Enlarge, Duplex and more. (Page 5.2, Page 5.3)
4Select the tray by pressing the appropriate tray on screen.
5Enter the number of copies using the number keypad, if necessary.
6Press Start on the control panel to begin copying.
Note
To cancel the current copy job, press Stop on the control panel. Or you can delete the current and pending job using Job Status on the control panel. Select the job you want to cancel and press Delete.
Changing the settings for each copy
On the Basic tab of the Copy screen, you can select copy features before starting to copy.
Note
The Basic tab setting is only for each copy. That means that the setting does not apply to the next copy job. After finishing the current copy job, the machine automatically restores the default settings after certain time. Or the machine resume to default setting when you press the Clear All button on the control panel or when you press other menu such as fax or else except the Job Status screen.
The default copy setting can be changed in Admin Setting. (Page 10.2)
Changing the size of originals
Press the Basic tab > Original Size, then use left/right arrows to set the original size.
Press more to see the detail values.
•Custom: Selects the scanning area of the original. Press the cardinal point arrows to set the size.
•Auto (DADF only): Automatically detects the size of originals, but this option supports only when originals are Legal, Letter, or A5 sized. If the originals is
•Mixed Size (Letter & Legal) (DADF only): Allows for the use of both of Letter and Legal sized papers together, and the machine uses the
•Other preset values: Allows user to easily select commonly used values.
5.2 <Copying>
