4Press the Advanced tab > Booklet.
5Press On to activate this feature, and select detailed settings for each option.
•1 Sided Original: Copys on one side of the paper.
•2 Sided Original: Copys on both sides of the paper.
6Press OK.
7Press Start on the control panel to begin copying.
Note
This feature is possible only with A4, Letter, Legal, Folio, Oficio, JIS B5, ISO B5, Executive, A5 and Statement sized paper.
Cover copying
The machine automatically adds covers to your copied set using stock taken from a different tray. Covers must be the same size and orientation as the main body of the job.
1Place the originals face up in the DADF. Or place a single original face down on the scanner glass. (Page 4.1)
2Press Copy from the Main screen.
3Select the tray in Paper Supply.
4Press the Advanced tab > Covers.
Note
Once you have set the Paper Supply option to Auto, you cannot use this feature.
5Press On to use this feature, and select detailed settings for each option.
•Position: Selects whether the cover will be placed at the front, back, or both.
•Cover Sheet: Selects whether the cover will be 1 sided, 2 sided, or blank paper.
•Paper Source: Select the paper tray, where the cover sheet is loaded.
6Press OK.
7Press Start on the control panel to begin copying.
Transparency copying
When you prepare transparencies for presentations, use this feature to copy the information.
Note
Before you start this special copy job, set the tray's Paper Types and Paper Size to Transparency.(Page 4.9)
1Place the originals face up in the DADF. Or place a single original face down on the scanner glass. (Page 4.1)
2Load the
3Set the paper type to Transparency.
4Press Copy from the Main screen.
5Press the Advanced tab > Transparencies.
6Select Transparencies option.
•No Separator: Does not place separator sheets between transparencies.
•Blank Sheet: Places a blank sheet between transparencies.
•Printed Sheet: Places the same image on the divider sheets as printed on the transparency.
7Select media sources, in case you selected either Blank Sheet or Printed Sheet.
8Press OK.
9Press Start on the control panel to begin copying.
Erasing edges
You can copy the original without any edges or margins.
1Place a single original face down on the scanner glass. Or load the originals face up in the DADF. (Page 4.1)
2Press Copy from the Main screen.
3Press the Image tab > Erase Edge.
4Select the appropriate option.
•Off: Disables this feature.
•Border Erase: Erases equal amounts on all edges of the copies.
•Small Original Erase: Erases 0.25" (6mm) from the edge of the copies. The original must be placed on the scanner glass to use this feature.
•Hole Punch Erase: Erases hole punch marks from the left edge of the copies.
•Book Center and Edge Erase: Erases shadows of a binding or book edge from the center and side edges of the copies. This feature only applies when you do copying a book. (Page 5.6)
Note
If you have set the Book Copy option to Off, you cannot use Book Center and Edge Erase.
5Press OK.
6Press Start on the control panel to begin copying.
Erasing background images
5.7 <Copying>
